22 grendel upper ~800 rounds on barrel
AKA as 224 predator & 22BGW, 6.5 grendel necked down to .224
ONLY ITEMS LISTED BELOW -- WILL PULL APART BEFORE SHIPPING
- 25.5" Bartlien barrel, (Remington Varmint contour turned down to accept 0.875" gas block), chambered by Baldwin Gun Works, 5/8-24 muzzle thread, +2" gas system
- +2" gas tube
- Odin Works head spaced bolt head
- (3) elander 6.5 grendel mags
Reloading supplies
-224 Predator set (expander ball marred up, has deep scratches from channel locks from trying to remove decapping pin, I ran without the decapper/expander and used a mandrel to set neck tension and seperate decapping die) -- (seater broke all the little keyring holders so I stopped using, went to )
- 22PPC redding competition seater
- roughly 150 lapua 4-5x fired (most either have loose pockets or are getting loose)
- roughly 75 1x fired starline
- roughly 175 0x starline converted brass
- (4) grendel MTM 50rd ammo boxes
Rifle shot 75 eld-ms 3175 but most of the rounds were 75 elds at 3100 and 80.5 bergers at a mild 2900.
Rifle is still shooting 3/4"-1" like it has since it was new. Should have a lot of life left. Never messed with getting it any tighter. Had plans to hunt with it but it never left the bench. Selling to fund a bolt gun build.
$725 shipped for what is listed above
Will only sell remaining parts after barrel amd loading stuff sells.
More than happy to video call or talk on the phone.
Only trades I'd be interested in are impact 737r 223ai barrel or Manners PRS3 + cash for 737.
AKA as 224 predator & 22BGW, 6.5 grendel necked down to .224
ONLY ITEMS LISTED BELOW -- WILL PULL APART BEFORE SHIPPING
- 25.5" Bartlien barrel, (Remington Varmint contour turned down to accept 0.875" gas block), chambered by Baldwin Gun Works, 5/8-24 muzzle thread, +2" gas system
- +2" gas tube
- Odin Works head spaced bolt head
- (3) elander 6.5 grendel mags
Reloading supplies
-224 Predator set (expander ball marred up, has deep scratches from channel locks from trying to remove decapping pin, I ran without the decapper/expander and used a mandrel to set neck tension and seperate decapping die) -- (seater broke all the little keyring holders so I stopped using, went to )
- 22PPC redding competition seater
- roughly 150 lapua 4-5x fired (most either have loose pockets or are getting loose)
- roughly 75 1x fired starline
- roughly 175 0x starline converted brass
- (4) grendel MTM 50rd ammo boxes
Rifle shot 75 eld-ms 3175 but most of the rounds were 75 elds at 3100 and 80.5 bergers at a mild 2900.
Rifle is still shooting 3/4"-1" like it has since it was new. Should have a lot of life left. Never messed with getting it any tighter. Had plans to hunt with it but it never left the bench. Selling to fund a bolt gun build.
$725 shipped for what is listed above
Will only sell remaining parts after barrel amd loading stuff sells.
More than happy to video call or talk on the phone.
Only trades I'd be interested in are impact 737r 223ai barrel or Manners PRS3 + cash for 737.
Attachments
Last edited:
