anyone have any load daty for 300wm running 220 smk. its comming out of a remington sedero old style.
thnks
thnks
300wm w/220 smk's
- Thread starter sgtusmc_nc
- Start date
Re: 300wm w/220 smk's
I will have to look at my notes to really help you out but 7828 shot good with that bullet.and I think Ramshot magnum all so shot good.will take a look and get back to ya.
I will have to look at my notes to really help you out but 7828 shot good with that bullet.and I think Ramshot magnum all so shot good.will take a look and get back to ya.
Re: 300wm w/220 smk's
Does the Sendero have sufficient twist rate to stabilize the 220 grain bullet? I shoot 190 SMK, or the 185 Laupa out of a 1-11 twist Obermeyer and it works fine. But I think I'm close to having too slow of a twist to stabilize the 220 grain bullets.
Does the Sendero have sufficient twist rate to stabilize the 220 grain bullet? I shoot 190 SMK, or the 185 Laupa out of a 1-11 twist Obermeyer and it works fine. But I think I'm close to having too slow of a twist to stabilize the 220 grain bullets.
Re: 300wm w/220 smk's
I beleive it has a 12 twist, the military is using a 11 twist so Im just to to have to see?
I beleive it has a 12 twist, the military is using a 11 twist so Im just to to have to see?
Re: 300wm w/220 smk's
My guess is you need a 10 twist min. My 5r 300wm is 10 twist, shoots 208amax great. Son has a 5r 308 11.25 twist rechambered to 300wm and shoots 190smk's great, not so good with 208amax.
My guess is you need a 10 twist min. My 5r 300wm is 10 twist, shoots 208amax great. Son has a 5r 308 11.25 twist rechambered to 300wm and shoots 190smk's great, not so good with 208amax.
Re: 300wm w/220 smk's
Shoot the 208/210grn weight bullets. Better BCs and you can get them moving faster. Lots of load data in the 300WM data post in the Reloading Depot at the top of the main reloading section page.
Shoot the 208/210grn weight bullets. Better BCs and you can get them moving faster. Lots of load data in the 300WM data post in the Reloading Depot at the top of the main reloading section page.
Re: 300wm w/220 smk's
FWIW....
The Navy's new load for the 300WM using the 220gr SMK, utilizes H1000 powder. It is loaded to get 2850 to 2950 fps velocity. The pressure spec is up there though. They state a max chamber pressure of 77,000 psi. I don't think they are worried about reusing the cases..
FWIW....
The Navy's new load for the 300WM using the 220gr SMK, utilizes H1000 powder. It is loaded to get 2850 to 2950 fps velocity. The pressure spec is up there though. They state a max chamber pressure of 77,000 psi. I don't think they are worried about reusing the cases..
Re: 300wm w/220 smk's
ive got some h1000, thats what im going to try with the 220's, ive also go some 200gr accubonds im going to try.
ive got some h1000, thats what im going to try with the 220's, ive also go some 200gr accubonds im going to try.
Re: 300wm w/220 smk's
Just got a bunch of 210 vld bergers started working up a load yesterday for my 5r 300wm.74gr h1000 cci250 3.883oal 2670fps
have not streched it out yet but 3 shot .4 moa 100yds
Just got a bunch of 210 vld bergers started working up a load yesterday for my 5r 300wm.74gr h1000 cci250 3.883oal 2670fps
have not streched it out yet but 3 shot .4 moa 100yds
Re: 300wm w/220 smk's
kool, I just put my 300 in time out LOL, I just got my 25-06ai from the smith yesterday and the first the rounds out it her went in almost the same hole.. I wish my 300 load development went that well.
kool, I just put my 300 in time out LOL, I just got my 25-06ai from the smith yesterday and the first the rounds out it her went in almost the same hole.. I wish my 300 load development went that well.
Re: 300wm w/220 smk's
77.2 Grs of H1000 is spitting out 220 SMKs at 2950 fps, thats from a bartlein 1/11 24 1/2 tube and using the MK248 reamer.
77.2 Grs of H1000 is spitting out 220 SMKs at 2950 fps, thats from a bartlein 1/11 24 1/2 tube and using the MK248 reamer.
