300wsm 200eld-x

[Twisted300Win MAG]

I just finished the metal work on a 300WSM for an elk hunt this October. Im going to bed the stock then I'm ready to head to the range. I'm looking for any insight on loads for the 200gr ELD-X. I throated my chamber for the 200gr bullets. I'd like to stick with H1000 or H4831. However I do have Hybrid 100 and H4350 on hand. Build details as fallows.
Rem 700 blueprinted
Hart barrel in a custom contour finished at 24"
1:10 twist 6 groove
Jewell trigger
Manners EH1
Leupold VX6 3-18x44
Thanks
Donald

 

[Geno C.]

I run H4350 in my WSM with 210vlds. A lot or LR benchrest guys run that combo too. It's not the fastest but almost always the most accurate. I've tried 4831sc also with good results. Never tried 1000 though. I doubt I could get enough in the case to make t work how I'd want it to.

 

[wind gypsy]

66.6 (from memory..) grains of h4831 and a 210M is my elk load with 200 eldx

 

[Josh0369]

I'd be interested in this data as well? Are you running a long or short action?

 

[Twisted300Win MAG]

I'd be interested in this data as well? Are you running a long or short action?

I'm running a long action.