• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

308 juggernauts with ???powder

Icewater

Private
Full Member
Minuteman
Apr 4, 2014
93
0
Hey guys, trying to get some juggernauts, just wondering what powders have been performing well for you.
I have some varget, r15, and imr4064 to try. I do have some r17 that I probably won't be try with the jugs. Anything else I might want to try for developing an accurate load?

Rifle is a 308 savage 24" barrel 1-10 twist if it matters
 
Hey guys, trying to get some juggernauts, just wondering what powders have been performing well for you.
I have some varget, r15, and imr4064 to try. I do have some r17 that I probably won't be try with the jugs. Anything else I might want to try for developing an accurate load?

Rifle is a 308 savage 24" barrel 1-10 twist if it matters

Varget is probably the most commonly used powder of the ones you listed with juggernauts.......H4895 is another good powder with juggernauts.
 
Last edited:
I found two good loads for the 185 juggernaut.
With 47 grains of pp2000 mr, I'm getting 2830 fps out of a 28" 1:11.25 Bartlein. About 28.5 moa to 1k with a 100 yard zero.
Also found another EXCELLENT load with IMR 4064. Lapua brass ,210m primer.


*** it's not hot in my rifle but it may be in yours !!***
 
ImageUploadedByTapatalk1413078958.878976.jpg

Shot this today 5 shots @ 100yds using the above load prone off the bipod with rear bag. (41.7gr 4064 @ 2.875 in Rem or FGMM brass with CCI LRP).
 
Last edited:
308 juggernauts with ???powder

Nice shooting, what velocity you get with this load?


Sent from my iPad using Tapatalk

I was at a Team Blaster class last weekend and my data was consistent with 2550fps out to 500yds out of a 20" 5R barrel. This is also what my Pro Chrono digital has registered with this load. According to AB this load is still going Mach 1.22 at 1000yds, but I won't be able to test it until next year [emoji20]. Interestingly my FDAC was pretty much spot on if I used the 2600 card for the 175HPBT.
 
Last edited:
I pulled out my data book today and looked up the chrono info. On 09-21-14 I logged the following data:

67*, 60%, 29.92, 1492 DA, partly sunny, Pro Chrono Digital 15' from muzzle, 10 shots: 2548 avg, 25 ES, 7 SD / 100yds U0, 200yds U.5, 300yds U1.4, 400yds U2.4, 500yds U3.5

At the Team Blaster class 10-5-14 it was 37* in the morning, going up to 52* in the afternoon (Around -200 to 450 DA). We shot paper targets @ 100yds, and then steel out to 500yds. My holdovers and zero were the same over the 30* temperature change. (FYI I was using Re15 in the past, and I think it might have been a little more accurate in my rifle, but I was getting crazy velocity swings with temp changes.) Please keep in mind I am not a benchrest shooter, or F Class, and all my shooting is prone, barricade, or tripod with a Pig saddle and this load is working out really well for me.