338 lapua load info
- Thread starter tmxring
- Start date
Re: 338 lapua load info
retumbo or h1000(these are your least temp sensitive powders).... velocities between 2700-2750
the Reloader powders tend to chance with the seasons
retumbo or h1000(these are your least temp sensitive powders).... velocities between 2700-2750
the Reloader powders tend to chance with the seasons
Re: 338 lapua load info
Im runnin 88 grains of reloder 25. Shoots very well and gives good brass life.
Im runnin 88 grains of reloder 25. Shoots very well and gives good brass life.
Re: 338 lapua load info
I'd like to know if you can use WC860 or 5010, one place I've bought surplus powder from before has both for 75$ per 8lbs. A buddy of mine has a remington 338 lapua and if I can use surplus powder then I'll be all over it (he has brass, dies, bullets, everything else).
I'd like to know if you can use WC860 or 5010, one place I've bought surplus powder from before has both for 75$ per 8lbs. A buddy of mine has a remington 338 lapua and if I can use surplus powder then I'll be all over it (he has brass, dies, bullets, everything else).
Re: 338 lapua load info
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BCP</div><div class="ubbcode-body">I'd like to know if you can use WC860 or 5010, one place I've bought surplus powder from before has both for 75$ per 8lbs. A buddy of mine has a remington 338 lapua and if I can use surplus powder then I'll be all over it (he has brass, dies, bullets, everything else). </div></div>
If you're trying to save money on powder, then 338LM isn't for you. Bullet/Brass cost far outweighs the powder.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BCP</div><div class="ubbcode-body">I'd like to know if you can use WC860 or 5010, one place I've bought surplus powder from before has both for 75$ per 8lbs. A buddy of mine has a remington 338 lapua and if I can use surplus powder then I'll be all over it (he has brass, dies, bullets, everything else). </div></div>
If you're trying to save money on powder, then 338LM isn't for you. Bullet/Brass cost far outweighs the powder.
Re: 338 lapua load info
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: tmxring</div><div class="ubbcode-body">Anybody tried us 869? </div></div>
Yes it works well for me (110BA), but I gotta use a lot of it VS H1000
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: tmxring</div><div class="ubbcode-body">Anybody tried us 869? </div></div>
Yes it works well for me (110BA), but I gotta use a lot of it VS H1000
