338 lapua loads using h1000

[jacobharper11]

I need some help on some starting loads shooting a Berger 300 grain hybrid using h1000

 

[navajo1018]

Re: 338 lapua loads using h1000

From berger:

Load data was generated using Quick Load a 26 inch barrel a COAL (cartridge over all length) of 3.681 inches and your COAL and velocity could be a little different.

H1000

Start
80.0 gr. 2470 fps

Max
84.3 gr. 2600 fps 102.7% Load Density

Also If you email the nice folks at Berger they generally get back to you within a day with data.

 

[PSYOPS]

Re: 338 lapua loads using h1000

Check out this thread!


http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2799518#Post2799518

 

[CanSniper]

Re: 338 lapua loads using h1000

Most end up around 91-91.5. Thats on the hot side so work up.

 

[Cmonroe]

Re: 338 lapua loads using h1000

Like CanSniper said above, 91.0 was fine for me too. I think there are five of us here all running 91.0

 

[ManOfAction]

Here is a velocity workup I did with H1000 and the 300 Berger OTMs. These are loaded long at 3.750 COL, with a 30" barrel at 60deg F.