I've got a Stag 6.8 with 1/2x28 thread pitch...I'm looking to put a M4-2000 on it but the only 6.8 mounts I can find are 5/8x24...anyone know where I might locate one 1/2x28?
Thanks
-Brown
Thanks
-Brown
Suppressors AAC Brakeout for 6.8 with 1/2x28 thread pitch?
- Thread starter MrBrown
- Start date
Re: AAC Brakeout for 6.8 with 1/2x28 thread pitch?
are you sure they are 1/2x28? That would leave little meat there given the bore to thread ratio....
are you sure they are 1/2x28? That would leave little meat there given the bore to thread ratio....
Re: AAC Brakeout for 6.8 with 1/2x28 thread pitch?
gotta get the 1/2x28 223 brake and drill it out. I had the same problem and it works like a champ!
gotta get the 1/2x28 223 brake and drill it out. I had the same problem and it works like a champ!
Re: AAC Brakeout for 6.8 with 1/2x28 thread pitch?
Use some good bits for the hard brake metal.
I think 5 HSS got smoked when I did mine.
Go slow and use lots of coolant/lube or the metal will get even harder and the next bits won't have a chance.
Got an FAL from DSA that uses 1/2-28 on the 7.62 barrel (talk about no meat)
Use some good bits for the hard brake metal.
I think 5 HSS got smoked when I did mine.
Go slow and use lots of coolant/lube or the metal will get even harder and the next bits won't have a chance.
Got an FAL from DSA that uses 1/2-28 on the 7.62 barrel (talk about no meat)
Re: AAC Brakeout for 6.8 with 1/2x28 thread pitch?
Id let someone that knows machining do that mod on the 1/2x28 break. Your also going to have to find a tap in your desired size. They can be expensive.
Id let someone that knows machining do that mod on the 1/2x28 break. Your also going to have to find a tap in your desired size. They can be expensive.
Re: AAC Brakeout for 6.8 with 1/2x28 thread pitch?
In my case the bore of the brake was drilled out with no change in the thread size.
In my case the bore of the brake was drilled out with no change in the thread size.
Re: AAC Brakeout for 6.8 with 1/2x28 thread pitch?
I have a DSA FAL to with the insanely stupid 1/2 x 28 thread and needed the same thing you do so I called up Mike Mers @ AAC and he hooked me up with the proper 1/2 x 28 30 cal mount it was not listed as in stock on the AAC web site. He also cautioned me not to mill / drill out a 5.56 cal mount as the mounts are cut using an EDM machine to ensure proper spec / fit ect. and since he sold me the mount I needed I did not peruse drilling anything I'm not saying its a world ender to machine out a 5.56 mount just that he told me not to FWIW, tahnks
I have a DSA FAL to with the insanely stupid 1/2 x 28 thread and needed the same thing you do so I called up Mike Mers @ AAC and he hooked me up with the proper 1/2 x 28 30 cal mount it was not listed as in stock on the AAC web site. He also cautioned me not to mill / drill out a 5.56 cal mount as the mounts are cut using an EDM machine to ensure proper spec / fit ect. and since he sold me the mount I needed I did not peruse drilling anything I'm not saying its a world ender to machine out a 5.56 mount just that he told me not to FWIW, tahnks
Re: AAC Brakeout for 6.8 with 1/2x28 thread pitch?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KYS338</div><div class="ubbcode-body">Id let someone that knows machining do that mod on the 1/2x28 break. Your also going to have to find a tap in your desired size. They can be expensive. </div></div>
no no no, it was easy, I chucked it up in a drill press, and gradually stepped up, using larger and larger drill bits, to get the size i needed. The bit NEVER touches the 1/2x28 threads.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KYS338</div><div class="ubbcode-body">Id let someone that knows machining do that mod on the 1/2x28 break. Your also going to have to find a tap in your desired size. They can be expensive. </div></div>
no no no, it was easy, I chucked it up in a drill press, and gradually stepped up, using larger and larger drill bits, to get the size i needed. The bit NEVER touches the 1/2x28 threads.
Re: AAC Brakeout for 6.8 with 1/2x28 thread pitch?
Well to make matters worse...stag shows it to have 1/2x36 threads...so i'm gonna have to do some more research. Thanks for all the input guys.
-Brown
Well to make matters worse...stag shows it to have 1/2x36 threads...so i'm gonna have to do some more research. Thanks for all the input guys.
-Brown
Similar threads
