That’s a very nice rifle set up
Grand it’s worth about as much as my house still really nice
BREAKING NEWS: Australian Defence Force Chooses The Accuracy International AXSR As Its New Sniper Weapon System
For the last couple of years the Australian Defence Force (ADF) has been going through a small arms replacement program called Land 159. This program is intended to replace all the ADF’s smal…
precisionrifleguy.com
I wonder how much units of axsr will be in contract? AI gonna be really busy producing to meet the amount contracted when it goes through. Guess nows a good time to purchase a axsr before it’ll be rarely available for consumers when that starts.BREAKING NEWS: Australian Defence Force Chooses The Accuracy International AXSR As Its New Sniper Weapon System
For the last couple of years the Australian Defence Force (ADF) has been going through a small arms replacement program called Land 159. This program is intended to replace all the ADF’s smal…
I can't imagine it being more than 200 max. We aren't a big defence force
It is probably closer to 100. Even then AI UK has produced enough rifles for many years for different contracts. With AI NA now doing production they need to step up. It will be quicker than the Barrett MK22 thats for sure.
AI has always been a mil contracts company first.
Yea but what about your SOF reserves? Don’t y’all have about 50 million kangaroos? I get that not all of them are school trained, but I’m assuming there’s a pipeline for the Joeys?
Pricing on these just went up to $10,390 as of today also. Not getting any cheaper.
A lot of bolt wear on the top of the action since the rifle will be literally be upside down being used down under.
Of course they fucking are. Between this and the standing up of a Joey SSP on that island filled with upright non-human creatures that can take your lunch money without trying, there won’t be a single AXSR in the Lord’s 1337 Sand come December.
The only thing worse than being a poor and not able to afford sophistication is to be a civilized individual that can afford sophistication but is trapped in a country run by uncivilized swine.
No worries at all, we all have money constraints limiting our choices at times.
Well thankfully I spent my money on it, not yours, so you dont need to worry too much.
300NM AXSR with Nightforce ATACR 7-35x56 Tremor 3, Strike Without Warning Tuner Brake and a sweet rattle can paint job done by yours truly. Looking forward to seeing these at work when they filter in.
These are the two official images released by the Australian Defence Force of the ASXR they have selected with ancillary equipment. Can't tell what model ATACR is sitting on top there. There is a sneaky Leupold Delta Point Pro offset red dot there by the looks. Great choice on the Steiner LRF too.
I assume, since you're using a tuner, it produced identifiable results with that magnum caliber?
Running the 300NM barrel with 225 ELDM at 1400 yrds this morning. Using my new spuhr mount, went from a 40mm height to a 48mm, huge difference in head placement for me. No longer looking through the rim of my safety glasses. Very comfortable.
It appears to have the NF ELR prism too, yeah? Looks like there are two front lens caps in this image.
At this past week's class with Frank and Marc in PA
I too have concluded that the 1.89” / 48mm mount is the height I need for my AX (31mm off the pic rail to the bottom of the scope). I had stacked a Bobro riser and M10 rings that I had laying around to test that height.
I wish ARC made their Mbrace mount that high, but they don’t so I also have a Spuhr like yours inbound.
Not the most aesthetically pleasing look (better on our AX’s vs an AT), but comfy where it counts.
@Nik H
It’s a Knights bridge specific to the older AW(SM) line. I’m not sure if it would work for an AT but I’m incline to try it. What’s nice about it is the ability to adjust the height to align with the action rail. The Badger IMUNS is another option. There’s a few more but I’m not entirely sure about all the options out there.
That’s a Sawtooth AW ARCA rail.
Willing to bet they had the KAC bridge to take measurements because it fits like a glove. They were made for each other.
She did very well. We had to shoot a 5 shot 300 yard group as part of the class. Mine was top of the bunch at 1.1 inches. I took a photo of it somewhere.
The class is nothing short of fantastic. It will challenge you regardless of your skill level. I have taken Frank and Marc classes prior but this was my first time taking a PR2 class. It was challenging to say the least. I would highly recommend it for anyone that wants to eliminate the bad habits that you might not even know that you have.
Guess Knights started to make these again? I have seen a few on the AWMs sent to Ukraine. Older versions have the Knights logo right below the part number
Can someone help me identify the issue with the NV mount please?
I picked this AT from another member it a 15 AT factory 20" 308/7.62 barrel, it came as pictured. The problem is the barrel is bias toward the top of the mount. Please see pics.
Is this the correct NV mount for this model?
I would really like to go back to the factory non NV look or atleast buy the original bipod forend.
I picked this AT from another member it a 15 AT factory 20" 308/7.62 barrel, it came as pictured. The problem is the barrel is bias toward the top of the mount. Please see pics.
Is this the correct NV mount for this model?
I would really like to go back to the factory non NV look or atleast buy the original bipod forend.
Attachments
This is what the AI AT bridge looks like, so I'm not entirely sure what you've got there... Clearly something aftermarket but it doesn't look right to me. Does it attach via the spigot?
Edit: Oh I see now... Kinda looks like someone adapted a KRG rail to an AI. One of these guys that knows more than I about these will be along shortly though.
Edit: Oh I see now... Kinda looks like someone adapted a KRG rail to an AI. One of these guys that knows more than I about these will be along shortly though.
I think it's a Badger Ordnance IMUNS, just doesn't sit centerbore of the barrel.
There were two imuns barrel channel specs iirm. One for coverts running the integrally suppressed barrels and reg. Curious if that is for the reg or if there was a different spec for the aics chassis using remmy footprints
It's a pretty rare part to find. I have only seen it on a couple AIs. I think there is one other person the Hide that has it on their rifle that I have ever seen. I have one of the OG versions with the logo. Last one I have seen sold on the open market was around 1k on ebay
