My AXSR’s participation trophy for taking second at a pistol match. And by participation, I mean participating in being home during the UPS delivery guy’s visit after getting home from the match. Time to see what all the hubbub is about.
I did
I’m in my sleep around phase right now…have to pick a partner before I bust out the rattle cans in December.
Nothing against it. Was trying to sell it to buy and try the SB636 with the TR2ID, but a guy on here offered this as a 1:1 trade so I said sure.
Just bouncing around scopes before picking one to live on the AXSR before I paint it.
Yeah, just wow!
@M8541Reaper I’m testing the SB 6-36x TR2ID tomorrow after getting it back from repair. As-delivered it had a serious parallax binding issue, but I think it’s going to be GTG now.
Interesting. Why? I only have the 7-35 ATACR, several SB 5-25s, and the new SB 6-36 to compare. And because this is a picture thread, AXMC 300NM with the SB 6-36 TR2ID (one of the first with the new reticle).
Last edited:
Pic tax for those hurt by my words and non-picture actions here tonight.
Looks like you didn’t make any compromises… not even zero of them.
What reticle you go with?
No paint=low social credit
Gen3XR Fine
It’s ok, I’m going to buy the spray paint with my Star Card. Guaranteed social credit boost. It’s got the points cards crave!
What are your thoughts on the TR2ID? I plan to have my 6-36 swapped to that reticle eventually.
So far I like it, but I’ve only had one session with it at distance. It’s a good “sparse” tree reticle. I just shoot ELR at my own range, no comps. I only need the tree for when I run out of Elevation on the turret and need to hold over AND hold some wind. I have a Tremor 3, but it is sooo busy it is hard to spot misses. I also have a Mil-XT which I like a lot. This is very similar. I don’t know how it would be for comps, but for me I think it’s perfect. (WAAAY better than the P5FL with not enough info, and the GR2ID that looked even busier than the Tremor3 to me).
Last edited:
How many S&Bs will Dr Strangeglove buy this year?
Comp shooters , if you switch to upgraded followers. Keep an old mag around. Can only fit 10 in the new style. 11 in the ole style helps on the 12 round stages.
Last edited:
Give it a year, Magpul will release 50rd AICS and 100rd AXSR/MC drums
Well…it went 4,287rds in AZ meth dust before it went down. I should have not been an asshole and just flushed it each time I tore it down rather than just hitting it with a brush. Popped the spare in and got back to work.
#SparePartsSavedTheDayThePawPatrolWay
#DontNeglectYourTriggersNeeds
#MissingButLookingCoolIsBetterThanMissingAndLookinLikeATool
By went down do you mean it wouldn’t reset? Wouldn’t fire? Was firing without pulling the trigger? Was first or second sear out of adjustment? Working fine after hosing it out with some liquid?
As in it wouldn’t recock the firing pin when closing the bolt. Nothing was adjusted on the trigger so it still sits adjusted as it came. Going to buy some brake cleaner and compressed air but it worked for a few cycles after a light fluid flush but then it stopped again. I’m not worried, just going to give it a good cleaning and blow out tonight.
Lighter fluid, brake cleaner etc all work fine. Seen a couple that had to be opened up completely...
Give me a 3 pos safety and an og trigger everytime baby
Almost time to get a ZCO on my AT-X, and put old glory back on the AT. Never thought I’d have one AI let alone 2.
Meet the Barrett Mk22, brought to you by AI's un-neccessary trigger-fiddling experiments.
Last edited:
Didn't realize you were at that match, it was a fun one despite the target failures.
What reticle is that?
Good. I've found it sad that the AT has been sitting in the closet untouched...
Yes. Target indicators on the bars would have been nice also. I was mostly punishing berms but was nice to get to a match
MR2. In my spotter. Ffp. I like it to measure targets / misses and “pre shoot” stages
And in case anyone didn’t look close and thought we were shooting full size ipsc lol.
Beautiful set you have!!
Trying to decide currently if I’m going to multicam my ATX (elite sand currently) or trade it out for another AT/thumbhole
Wasn't me bruh I got lots of hair....also wouldn't be caught dead running a NF or Leupold everyone knows this .....
Last edited:
Wish I realized you were there and using a Minox spotter, would love to get to look through it sometime!
Is there anyone near Idaho Falls that would let me cycle their AXSR a few times and maybe try a barrel swap? I am trying to break down my reasons for not owning one. 
I keep finding peace at shooting a lot more since Mom got diaged with bad C last month. I shoot almost every other day to clear my head. Lately been thinking about a new scope; maybe the 6-36 S&B with the new reticle. Then i forget. Waiting for my new barrel to come in this Friday. Then i will retire this one.
A new range to me with grass even! First time there, gave the AXSA ES a spin. Just 4 benches, I'd have brought a shooting mat had I known it's primarily a prone range.
Can't you just lay down and shoot on the grass without a mat?
Can you shoot more than 200yds at this range?
200 yards is the max that was available to me. Not sure what else they might have there longer.
Yeah I could have just laid down, but wasn't really dressed for grass/dirt. I figured they had good benches. Live and learn.
Always take your mat. Even if planning to shoot off a bench, the mat placed on top of the bench makes things nicer all around.
Lol, the sandpit gotcha, welcome to the club. Glad you had your backup. I've just started zippo fluid drenching mine from the top after a sandy/windy match.
You’re a 308 AI shooter!! We’re better than that. We look for the dirtiest, muddiest, lowest water seepage spot to lay in. It’s who we are, it’s what we do
6.5 guys bring their blanky and throw pillow!
In stock at time of posting
Short action SFP 308 bolt complete
www.eurooptic.com
Short action SFP 308 bolt complete
Accuracy International Bolt Assembly Complete 308 Win including bolt/shroud assembly with 1.6mm firing pin. MPN 26547BL | SHIPS FREE! - EuroOptic
Accuracy International Bolt Assembly Complete 308 Win including bolt/shroud assembly with 1.6mm firing pin. MPN 26547BL | Only at EuroOptic.com!
