• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Accuracy International Picture Thread

What is the weight of this as configured?
Heavy AF. I haven’t weighed it. But it’s heavy by design. This isn’t a hunting backpacking rifle. It’s meant to be heavy. If you’re looking for light I really enjoyed my Q Fix. It was 6.2lbs with a carbon 16 inch 6.5CM barrel.
 
  • Like
Reactions: SkyScrapin
Took the AXSR 300 WM to the range today. Not too hot about 83 degrees, some wind. First groups out of the rifle. Bore sighted, 2 shots and on target. After shooting my groups I noticed the pic rail that the bipod mounted to was loose. Need to check this stuff on new AI's.

20200802_155303.jpg


20200802_155250.jpg


20200802_155315.jpg


300 WM... my bad!
20200802_172308.jpg


20200802_172244.jpg
 
Slightly off topic....."Hootiewho!!!" Is my favorite near recognition signal when cloverleafing back into the MSS. Or these days walking through the barracks trying to catch privates doing dumb shit.



LOL
 
That's a $30K 4 point.

It has been divided up among a good many critters. Hogs, coyotes, deer....

Cheaper than a bass boat, better resale, and most of the time I end up making the landowner happy by squashing hit critter problems.
 
Slightly off topic....."Hootiewho!!!" Is my favorite near recognition signal when cloverleafing back into the MSS. Or these days walking through the barracks trying to catch privates doing dumb shit.

Not a good loud " hey guy? Or war hero?" With a knife hand huh?
 
I like to see their confused "racoon in a trashcan faces" as they simultaneously hold a PS4 controller in their hands and pretend to be actually pulling CQ correctly. It's like a flashbang for their brains.

Lol indeed
 
Testing a used .308 barrel before zeroing the new scope with the 6.5 barrel

3F9D7D9A-017A-445D-9B76-AD927A55062E.jpeg


Old well used factory 7.62x51 barrel did good for 4 shots with Hornady 155 steel match till I pulled he 5th shot.

E708D5C1-4B38-4DA1-A3CD-18FD11E33217.jpeg


Hornady 6.5 AG 140s also did well for 5 shots in a 18” PVA button 6.5 cm barrel

E803039E-7A84-468B-845F-23FFD848F7AB.jpeg
 
if you had went with a sage green AI, all those 308’s would be in one hole.
Yeah yeah that’s the color I wanted but I am a Poor and eurooptic only had FDE unfired demos for $5700


Would probably be in one hole if I had time to shoot instead of work lol. I’m much more consistent with my DTs for some reason.
 
  • Like
Reactions: Hootiewho
Yeah yeah that’s the color I wanted but I am a Poor and eurooptic only had FDE unfired demos for $5700


Would probably be in one hole if I had time to shoot instead of work lol. I’m much more consistent with my DTs for some reason.

Understood!
 
I hope all the foreign military is getting its intel from reruns of Gomer Pyle...
 
It's come down to which side of the rainbow you're on now, eh?? :)

I like them all!
 
So the ASR and proof barrel get along well.

.29 MOA with the following 6mm Creedmoor

-virgin unfired and untouched Lapua cases
-Berger 105 Hybrid target moving 3041 FPS
-40.0 grains RL16
-CCI 450 primer
-seated to 2.806 COAL
-AI ASR
-Proof Carbon 6mm Creedmoor 24 inch barrel. Barrel had 136 rounds on it at time of record.
-SD of 6.7 and ES of 16
-altitude 9000 FT (Norway Flats, Uintah mountains, Utah)

All in all gents the ASR is awesome. I do want to say I have had zero issues removing any barrels with all 3 Mlok rails on there. I know others mentioned they don’t care for it. I like it. I’m fine with it. Just saying.
 

Attachments

  • C9528DDE-43AD-4A54-B8D7-6E4B2099336B.jpeg
    C9528DDE-43AD-4A54-B8D7-6E4B2099336B.jpeg
    513.1 KB · Views: 55
  • 12438DE1-4218-4791-9ABE-68845EBA9614.jpeg
    12438DE1-4218-4791-9ABE-68845EBA9614.jpeg
    569 KB · Views: 44
  • 5AC198FB-66DB-4BC2-8D51-0C4B75AE5FD8.jpeg
    5AC198FB-66DB-4BC2-8D51-0C4B75AE5FD8.jpeg
    386.1 KB · Views: 51
Last edited:
5 shots. No pics. We messed that plate up good after so nothing I can take a pic of. I’m going out this weekend though so I’ll get some I make amends. It was a no phone weekend in the uintahs where there’s no cell service. Hot as hell in Utah. 108 in salt lake on sinday.

measured old school with tape measure and math
 
  • Like
Reactions: deersniper
5 shots. No pics. We messed that plate up good after so nothing I can take a pic of. I’m going out this weekend though so I’ll get some I make amends. It was a no phone weekend in the uintahs where there’s no cell service. Hot as hell in Utah. 108 in salt lake on sinday.

measured old school with tape measure and math

If you live in Utah you need to come shoot with the *unofficial* ai utah crew
 
Last edited:
Anyone in this thread use multiple hoppers on their A&D auto throw setups? I need some help finding a stand for my second glass hopper.


Posted my question in the reloading section as well, has a little more detail and pic, but I’m not getting anywhere.

Thanks, Bro’s.
 
You forgot to add “unofficial”, baby. Don’t get ahead of yourself 😉... 🤣😂🤣

Man I thought I really typed that! Edited for clarification!

I got twins teething right now so my life is a blur but rule # 76
source.gif
 
The 24 inch proof carbon barrel is exactly 2lbs lighter than the 24 inch steel 308 barrel. The gun is still heavy but it’s a little easier to move around. If I was custom ordering I’d do a 22 inch 6CM or a 22 inch 6.5CM barrel. With the hand guard length it seems that 18 inches is the shortest you can go with this fore end. I wouldn’t mind getting a shorter hand guard and a 16 inch carbon 6.5 and ride it around like the covert. Or at least have an option to do so

I don’t know the exact weight of the set up. But it’s heavy.
 
  • Like
Reactions: Surly
So the ASR and proof barrel get along well.

.29 MOA with the following 6mm Creedmoor

-virgin unfired and untouched Lapua cases
-Berger 105 Hybrid target moving 3041 FPS
-40.0 grains RL16
-CCI 450 primer
-seated to 2.806 COAL
-AI ASR
-Proof Carbon 6mm Creedmoor 24 inch barrel. Barrel had 136 rounds on it at time of record.
-SD of 6.7 and ES of 16
-altitude 9000 FT (Norway Flats, Uintah mountains, Utah)

All in all gents the ASR is awesome. I do want to say I have had zero issues removing any barrels with all 3 Mlok rails on there. I know others mentioned they don’t care for it. I like it. I’m fine with it. Just saying.
Seems like the proof prefits are a huge winner. Same pattern as the AXMC, right?
 
Yes. This is an AXMC proof pre-fit. I imagine proof will update it to say AXSR/AXMC. They MSRP for 1100 but can be had cheaper. I bought mine with 136 rounds on it for about half MSRP in the PX. I didn’t lowball either. I paid his asking. It was posted for like two weeks. I couldn’t believe no one had bought it. To me that’s a steal for a Carbon AI prefit.
 
Yes. This is an AXMC proof pre-fit. I imagine proof will update it to say AXSR/AXMC. They MSRP for 1100 but can be had cheaper. I bought mine with 136 rounds on it for about half MSRP in the PX. I didn’t lowball either. I paid his asking. It was posted for like two weeks. I couldn’t believe no one had bought it. To me that’s a steal for a Carbon AI prefit.
Totally agree