• Frank's Lesson's Contest

    We want to see your skills! Post a video between now and November 1st showing what you've learned from Frank's lessons and 3 people will be selected to win a free shirt. Good luck everyone!

    Create a channel Learn more
  • Having trouble using the site?

    Contact support

Adding rotation-limited flush cup to A2 stock: IWC or Noveske or?

carbonbased

💥💥💥💥
Full Member
Minuteman
Legend
Jul 26, 2018
5,916
9,994
Minnesota
IWC (impact weapons components): https://www.impactweaponscomponents.com/product/qd-micro-mount/

Noveske: https://noveske.com/products/flush-qd-sling-mount/

I've read the Noveske must be installed with particular care, as (slightly?) over-torquing it will break the outer flange.

I looked at this Grovtec and it's 360 (not rotation limited), and I tried this Grovtec , but it sticks waaay down from the stock.

Using a two-point sling. Thoughts between the the IWC and Noveske? Especially if you've used both.
 
Last edited:
I installed one in my A2 stock for my .260 Rem.

It’s been so long, I barely remember what I did but I just looked at the material depth, drilled the initial hole making sure to avoid hitting the RET cavity, and epoxied it into place IIRC. I made the cut so it was a press-fit.

I can snap some pics if it will help.
 
I went with a grovetec, as I remember they had both 360 and limited travel

Installed great in a luthar stock, took my time, tapped the hole, covered the threads in JB weld and slowly screwed it in with the provided bit, easy and clean install.