-
Having trouble using the site?
Contact support
AIAX Max Barrel Contour. MTU, Straight taper?
- Thread starter Mr. F
- Start date
I've had a couple barrels spun up for my AT rifle. I went with a 1.200" shank to better match the original barrel on the rifle. Like the M24 contour.
I think you would be fine but what muzzle attachment/supressor do you rock and what length you thinking?
For an AX/ AT/ AW/ AWM = 1.250"
For an AXMC/ PSR/ ASR/ AXSR = 1.350"
Yes, I run 1.250" straight on my AX and AW.
And 1.350" straight for the big bro's
For an AXMC/ PSR/ ASR/ AXSR = 1.350"
Yes, I run 1.250" straight on my AX and AW.
And 1.350" straight for the big bro's
Last edited:
I think you would be good to go then. Only concerns I would have had was diameter of the muzzle attachment fitting to the barrel and having enough clearance to account for barrel whip not touching the end of the hadguard
Finishing a MTU/Heavy Var at 26" too thick for 5/8-24 threads on the 419 breck you think?
in the last year that's probably the most common combination of barrel/muzzlethread done for a prefit
works just fine...
I just place a order for a straight contour barrel today and realized I might be screwed when it comes to a muzzle break fitting flush with the barrel. Any breaks out there that won’t look like shit? It’s 1.250
Sidewinder Magnum Self Timing Muzzle Brake
The SIDEWINDER Self Timing Brake system was engineered from the ground up to reduce more recoil and muzzle flip, while being easier to install.
www.area419.com
The Sidewinder will probably look pretty good on it. It’s larger than the hellfire so it should go nicely with a thicc sticc
Yea that Area419 break OD IS 1.275” hope I didn’t make a bad decision ordering this fat ass barrel
People still care about brakes being flushed?
You'll be fine... with either brakes from APA or A419
You'll be fine... with either brakes from APA or A419
The area 419 collar and adapter are about 1.25ish.
They’d look fine on a 1.25 truck axle or coffee table glamour shots.
Then snag a hellfire at 1.1”
either way...
performance > aesthetics
...but of it’s for IG, then stick with aesthetics
either way...
performance > aesthetics
...but of it’s for IG, then stick with aesthetics
Hey everybody needs a sexy af back up rifle.Then snag a hellfire at 1.1”
either way...
performance > aesthetics
...but of it’s for IG, then stick with aesthetics
sidewinder is fine on a 1.25" straight. collar is just bigger than barrel OD even if the brake itself is smaller
@Huxtable_hurt_me28 Thats a A419 Sidewinder on a straight 1.25
but as @NoLegs24 said ive seen hellfires and other .9” breaks on straight pipes too and honestly they look even better imo idk
@Huxtable_hurt_me28 Pay no attention to this comment... this is a guy that just a few days ago was debating the finer points of red vs blue vs FDE AT-Xs colors on the AI thread...
Nope if the brake collar is too thick over the barrel taper you get a smith to contour that shit down to .001" boy
You're going to have to qoute me on that. Don't recall. Plus, I'ma have all the colors anyhow
Except blue, I don't think I can make that work... lol
You're going to have to qoute me on that. Don't recall. Plus, I'ma have all the colors anyhow
Except blue, I don't think I can make that work... lol
Blue Eyeliner, Sako guys use it all the time
I think that transition from barrel to brake looks pretty clean.View attachment 7603719
View attachment 7603720
View attachment 7603721
@Huxtable_hurt_me28 Thats a A419 Sidewinder on a straight 1.25
but as @NoLegs24 said ive seen hellfires and other .9” breaks on straight pipes too and honestly they look even better imo idk
OP... Looks like PVA made this just for you. 1.25 OD brake about to be released.
Have you seen the Insite arms?View attachment 7603719
View attachment 7603720
View attachment 7603721
@Huxtable_hurt_me28 Thats a A419 Sidewinder on a straight 1.25
but as @NoLegs24 said ive seen hellfires and other .9” breaks on straight pipes too and honestly they look even better imo idk
Attachments
I think that’s wat I’m going with, not going to have my other barrel for months though
