• Frank's Lesson's Contest

    We want to see your skills! Post a video between now and November 1st showing what you've learned from Frank's lessons and 3 people will be selected to win a free shirt. Good luck everyone!

    Create a channel Learn more
  • Having trouble using the site?

    Contact support

Gunsmithing AICS mags and the 6BR or 6Dasher

skeetlee

Gunny Sergeant
Full Member
Minuteman
Jun 13, 2008
1,564
35
50
Central Illinois
Will the AICS mags reliably feed a 6mm dasher or the 6BR cases? I need some solid info on this subject before i go any further with my thoughts. Who can alter the mags to work if needed? I will be using a badger action, I hope!! Lee
 
Re: AICS mags and the 6BR or 6Dasher

I have a Remington 700 chambered in 6 Dasher with the Badger M5 magazine kit and it works flawless. I do have a custom Kiff bolt which has the .062 firing pin and Sako extractor. I did slightly modify the ejector plunger, so it would sit slightly more forward to have better extractor pressure on the cartridge. I did not make any modifications to the mags, I load them with the cartridges to the ft of the mag. Hope this helps, Greg

MVC-003F.jpg