Bergara Rifles Pictures Thread *include specifics*
- Thread starter abentley324
- Start date
Going to toss my current build process in here. Figuring things out slowly, but having a lot of fun doing it. It's all been done on a pretty strict budget... kids are expensive.
Action - Bergara 308
Barrel - Bergara 308 - 20"
Trigger - Stock Bergara trigger (better than anticipated)
Stock - Grayboe/Bergara Ridgeback w/Grayboe Bottom Metal
Bipod - Atlas (regrettably, NOT the one with changeable mounts)
Rings - Aero Precision Matched Low (0.92")
Scope - Burris XTR II 5-25 - Mil
Ammo varies on what I am loading. Presently messing around with a 178g Hornady ELD-X.
Was shooting sub-MOA at 300yd prior to the fresh scope. Was consistently ringing 9" steel out at 600yd. Looking forward to seeing what the new glass can do for me! Still learning!
Action - Bergara 308
Barrel - Bergara 308 - 20"
Trigger - Stock Bergara trigger (better than anticipated)
Stock - Grayboe/Bergara Ridgeback w/Grayboe Bottom Metal
Bipod - Atlas (regrettably, NOT the one with changeable mounts)
Rings - Aero Precision Matched Low (0.92")
Scope - Burris XTR II 5-25 - Mil
Ammo varies on what I am loading. Presently messing around with a 178g Hornady ELD-X.
Was shooting sub-MOA at 300yd prior to the fresh scope. Was consistently ringing 9" steel out at 600yd. Looking forward to seeing what the new glass can do for me! Still learning!
Last edited:
Why do you regret the bipod? Which changeable mounts do you mean?
Because if you wanted a bipod that could attach a mount for arca, I'm sure there's one made for this specific bipod. I am running mine as such.
But if you meant something else, then idk.
I run this one and it's great.
www.wiserprecision.com
Arca-Adapter Pro - Precision Built Arca to Picatinny Adapter
The Arca-Adapter Pro is manufactured right here in the USA and is the missing link between your Arca-Swiss (1.5" dovetail) rail equipped precision rifle and your large inventory of accessories. The Arca-Adapter Pro comes standard as an Arca-Swiss to Picatinny adapter. It's also cut with a 17S...
www.wiserprecision.com
Atlas makes a couple models now that you can swap the heads out on. That'll allow you to go with Arca, Mlok, Picatinny, etc, without any extra adapters. Not a big deal... I just like to whine about specific things.
Glad I came across this thread, I’ve been wondering why there wasn’t a dedicated Bergara pic thread…I guess I just hadn’t found it yet.
Rifle as it currently sits, although I have a Magpul Pro Lite chassis arriving for it next week. Also going to include a photo of it in the factory stock.
Bergara B14 Wilderness, 6.5 Creed, factory grey cerakote
-HS Precision stock with Mathew’s Fab adjustable cheek riser
-Nightforce base
-Nightforce Ultralight rings
-SWFA 10x42 Mil/Mil
-Aadland scope caps
-Harris S-LM
-Triad Tactical padded sling
Rifle as it currently sits, although I have a Magpul Pro Lite chassis arriving for it next week. Also going to include a photo of it in the factory stock.
Bergara B14 Wilderness, 6.5 Creed, factory grey cerakote
-HS Precision stock with Mathew’s Fab adjustable cheek riser
-Nightforce base
-Nightforce Ultralight rings
-SWFA 10x42 Mil/Mil
-Aadland scope caps
-Harris S-LM
-Triad Tactical padded sling
I'll play. Bergara HMR Pro in a MPA Matrix Pro chassis. The rifle is chambered in 6.5 creedmoor and is the heavy barrel version.
B14 HMR in .308, Vortex Venom 5-26x56 in MOA, Nightforce Rings and 20 MOA Base, Little Bastard brake, Harris knock off. Nothing special yet, debating on a chassis setup for it.
Bergara HMR stock with APVA24 inch stainless 6.5 creed more barrel and an athlon Cronus Gen. 24.5 / 29 scope. Doesn't?
Show up, but it's also sporting.An a p a fat bastard break
