Suppressors broke my trusty knife
- Thread starter Jayne
- Start date
Re: broke my trusty knife
spyderco will probably reshape and sharpen it for little or nothing, if it bothers you enough to send it in .
spyderco will probably reshape and sharpen it for little or nothing, if it bothers you enough to send it in .
Re: broke my trusty knife
Just take a fine bastard file and shape the end and then recut the edge with a jewelers file or a fine bastard cut file and then resharped with a diamond rod / good sharpening stone or good quality sharpening steel.
Piece of cake.
....SmokeRolls
Just take a fine bastard file and shape the end and then recut the edge with a jewelers file or a fine bastard cut file and then resharped with a diamond rod / good sharpening stone or good quality sharpening steel.
Piece of cake.
....SmokeRolls
Re: broke my trusty knife
yup, reshape and keep on carrying it. I broke the tip on my gerber years ago ad it live in my pocket to thisd day.
yup, reshape and keep on carrying it. I broke the tip on my gerber years ago ad it live in my pocket to thisd day.
Re: broke my trusty knife
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TheSmokeRolls</div><div class="ubbcode-body">Just take a fine bastard file and shape the end and then recut the edge with a jewelers file or a fine bastard cut file and then resharped with a diamond rod / good sharpening stone or good quality sharpening steel.
</div></div>
I have one fine file and a couple good stones so I'll see what sort of damage I can do. Wait, that sounds really wrong...
Do I go file from the tip 'forward' away from the rest of the blade or from the tip 'backwards' toward the handle when reshaping?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TheSmokeRolls</div><div class="ubbcode-body">Just take a fine bastard file and shape the end and then recut the edge with a jewelers file or a fine bastard cut file and then resharped with a diamond rod / good sharpening stone or good quality sharpening steel.
</div></div>
I have one fine file and a couple good stones so I'll see what sort of damage I can do. Wait, that sounds really wrong...
Do I go file from the tip 'forward' away from the rest of the blade or from the tip 'backwards' toward the handle when reshaping?
Re: broke my trusty knife
You could have that reshaped fairly easily. Anyone that is competent with files and a wet stone could take care of that for you in about 15 minutes.
Dont give up on it!
You could have that reshaped fairly easily. Anyone that is competent with files and a wet stone could take care of that for you in about 15 minutes.
Dont give up on it!
Re: broke my trusty knife
Jayne,
Work your file out to the tip, taking some off the spine and the edge. When you are at about the same thickness on each the top and bottom start working your edge back into the shape with the file. Again removing the metal out towards the the tip. Go slow you can always take more off but too much will cause you to have to hog a bunch more metal off to get it right. Work the stones once you almost have an edge back on. If you are patient it should come out good. That is not a major amount of tip broken off. Shoot a picture when you are done with it and post it up. Good luck
Danel
Jayne,
Work your file out to the tip, taking some off the spine and the edge. When you are at about the same thickness on each the top and bottom start working your edge back into the shape with the file. Again removing the metal out towards the the tip. Go slow you can always take more off but too much will cause you to have to hog a bunch more metal off to get it right. Work the stones once you almost have an edge back on. If you are patient it should come out good. That is not a major amount of tip broken off. Shoot a picture when you are done with it and post it up. Good luck
Danel
Re: broke my trusty knife
I broke my spyderco this winter. It looked the exact same as yours. They make good knives but poor screwdrivers. I took it to the grinding wheel and reshaped it. Works like a champ again.
I broke my spyderco this winter. It looked the exact same as yours. They make good knives but poor screwdrivers. I took it to the grinding wheel and reshaped it. Works like a champ again.
Re: broke my trusty knife
Dont know about Spyderco but same thing happened to me with my BenchMade and I sent it into them and I guess they thought it was too much trouble to reshape and sharpen so they sent me a new one. Mine was about two years old at the time. Good luck.
Dont know about Spyderco but same thing happened to me with my BenchMade and I sent it into them and I guess they thought it was too much trouble to reshape and sharpen so they sent me a new one. Mine was about two years old at the time. Good luck.
Re: broke my trusty knife
Just to finish this thread out, I got my knife fixed this weekend. We were at a street fair (faire? fare? you know, buncha people selling junk in the street) and there was a guy there doing knife sharpening. $5 to fix the tip and put a better edge on it than it's had in years.
I now have a custom 1/8" shorter spyderco. Officers model.
Just to finish this thread out, I got my knife fixed this weekend. We were at a street fair (faire? fare? you know, buncha people selling junk in the street) and there was a guy there doing knife sharpening. $5 to fix the tip and put a better edge on it than it's had in years.
I now have a custom 1/8" shorter spyderco. Officers model.
Re: broke my trusty knife
I did the same to a Benchmade. I like it way more now than I did before. On my hip for 8 years everyday.
I did the same to a Benchmade. I like it way more now than I did before. On my hip for 8 years everyday.
Re: broke my trusty knife
Yepper, I did it one day to my Benchmade auto while chipping ice from the back of a freezer............... Duh. Like said above just carefully rework it with a file and re-sharpen. I debated having the blade replaced recently when the knife was back at BM for a repair but opt'ed against it. The not quite perfect tip gives it character..................... Look close and you can't hardly tell.
Yepper, I did it one day to my Benchmade auto while chipping ice from the back of a freezer............... Duh. Like said above just carefully rework it with a file and re-sharpen. I debated having the blade replaced recently when the knife was back at BM for a repair but opt'ed against it. The not quite perfect tip gives it character..................... Look close and you can't hardly tell.
