does anyone know of a bullet puller that will fit on the lee 50 bmg press? i can't find one anywhere. thanks
bullet puller for 50 bmg
- Thread starter bigdog2084
- Start date
Re: bullet puller for 50 bmg
C&H Tool Their web page
Click on 50BMG then bullet puller! I beleive they have them in stock.
Terry
C&H Tool Their web page
Click on 50BMG then bullet puller! I beleive they have them in stock.
Terry
Re: bullet puller for 50 bmg
the lee press has an opening of 1 1/4 inches not 1 1/2 inches. so the one from C&H tool won't work. thanks though for the help.
the lee press has an opening of 1 1/4 inches not 1 1/2 inches. so the one from C&H tool won't work. thanks though for the help.
Re: bullet puller for 50 bmg
If you don't mind a little work you can always re-tap it to 1 1/2. Then you can use RCBS,Hornady andC&H dies.
If you don't mind a little work you can always re-tap it to 1 1/2. Then you can use RCBS,Hornady andC&H dies.
Re: bullet puller for 50 bmg
corbin makes a pliers type that you could use with the lee press
http://www.corbins.com/cbp-50.htm
corbin makes a pliers type that you could use with the lee press
http://www.corbins.com/cbp-50.htm
Re: bullet puller for 50 bmg
I like the idea of re-tapping it. then i will just have to get new dies. i was going to buy a whole new press and everything.
I like the idea of re-tapping it. then i will just have to get new dies. i was going to buy a whole new press and everything.
Re: bullet puller for 50 bmg
You can buy a "5c collet block" off ebay and then buy a 13mm collet. All together should be around 50 bux. thats what a lot of guys use.
CJG
You can buy a "5c collet block" off ebay and then buy a 13mm collet. All together should be around 50 bux. thats what a lot of guys use.
CJG
