CCI BR4 1k (Limit 1) on Midway 3/19 9:05 PT

[KnowNothing256]

Says available, but I'm after 450s

CCI Small Rifle Bench Rest Primers #BR4 Box of 1000 (10 Trays of 100)

In Benchrest competition, there’s no such thing as a group that’s “too small.” Everything has to be tuned to the highest degree...

www.midwayusa.com

 

[slowworm]

CCI #34 are showing in stock too.

Not desperate so passing on both.

 

[KnowNothing256]

CCI #34 are showing in stock too.

Not desperate so passing on both.

Same, although if they had 41's in stock I'd be more tempted.

 

[siscoe308]

I tried but the system wouldn’t me process an order.
Not to sad tho for .12 per

 

[KnowNothing256]

Turns out there's another thread with other folks getting the same error, I just threw this up as soon as I saw it in case it actually worked. This is our life now...

 

[2aBaC̶a̶]

Scored some 34s. Wonder how they'll work in the 300PRC.

 

[Longshot231]

All gone now. Time now: 12:51 EDT.

 

[n0glock]

would not let me check out with the BR4, but they have Winchester small rifle military showing mixed, let me check out with a brick

 

[Halfnutz]

Mine went through eventually for #BR4 and #34's, kinda spendy!

 

[siscoe308]

Things seem to be thawing out a lil.

 

[nutation]

Things seem to be thawing out a lil.

Let's hope so. They had CCI #34s which remained in stock for over an hour this morning.

 

[DairyDictator]

Things seem to be thawing out a lil.

90 bucks plus haz-mat fees tend to have that effect on people...

 

[2aBaC̶a̶]

90 bucks plus haz-mat fees tend to have that effect on people...

They only allow 1 box. all said and done it was $108. Which is good, I dont think I could stomach any more.

 

[MK3XXX]

I tried for about 20 minutes to get my order to go through on the BR4, kept coming up as error, tried about 10-12 times

 

[siscoe308]

90 bucks plus haz-mat fees tend to have that effect on people...

Patience, young Grasshopper. Availability is the first step.

 

[spife7980]

I got some winchester 41s from midway today, they actually sat in my cart for a few minutes too. I got tired waiting for it to load in the middle of working on the water heater so I sat it down and then came back to it. Looks like the ar15 seasons back on for the pigs.

60 bucks plus the hazmat came to 92 bucks though. Sorta was hoping theyd get taken out of my cart at that price. These better not be like the other leaking winchester primers Ive loaded before.

 

[whatsupdoc]

I had some in my cart and decided I dont need them for that price. I will wait until I can just buy
5K at a time.

 

[KnowNothing256]

I had some in my cart and decided I dont need them for that price. I will wait until I can just buy
5K at a time.

This was where I ended up too, hazmat just makes 1k silly for me. Same with 1-2 lbs of powder, I’ll just wait for an 8 to show up.

 

[SONIC SAAMI]

I'll just walk into Bi-Mart and pull them off the shelf.

 

[bgavin]

I'll just walk into Bi-Mart and pull them off the shelf.
View attachment 7585880

Nice

Hope to see that in my area again soon

 

[st1650]

Are the 450s that much better for 6.5 creed ? Where I live, I have no problems getting Rem 7 1/2 and BR4s. I generally use the 7 1/2 for my 223 match and plan to use the BR4s for the 204 Ruger. I use Fed 205m on my 300blk bolt gun for subsonics.

 

[KnowNothing256]

I honestly couldn’t say, I haven’t gone so far as to test different primers. Right now I’d happily buy 205M if they were priced similarly to the 450s, but I’m not desperate enough to pay the premium on the BR4s. Couldn’t speak at all to the 7-1/2’s, but they don’t seem nearly as popular in the 6/6.5 precision world.

 

[Graye2]

I’ve had great results with 7-1/2’s with 6/6.5. However I understood they were discontinued. I’ve actually decided to save them for my 6.5 loads and have switched over to CCI 450’s for my 6 Dasher. All other loads (5.56 / 300 BLK) will get CCI 41’s or the new Winchester 41’s that I picked up (haven’t tested yet).

I have 1,000 BR4’s but haven’t decided what I’ll load them in...I don’t like switching primers for precision so I’ll need to find 2-3k more before I switch.

@st1650 ...do you mind sharing your location and if they are old stock vs. new? It would be good to know if in fact they haven’t been discontinued.

 

[st1650]

I’ve had great results with 7-1/2’s with 6/6.5. However I understood they were discontinued. I’ve actually decided to save them for my 6.5 loads and have switched over to CCI 450’s for my 6 Dasher. All other loads (5.56 / 300 BLK) will get CCI 41’s or the new Winchester 41’s that I picked up (haven’t tested yet).

I have 1,000 BR4’s but haven’t decided what I’ll load them in...I don’t like switching primers for precision so I’ll need to find 2-3k more before I switch.

@st1650 ...do you mind sharing your location and if they are old stock vs. new? It would be good to know if in fact they haven’t been discontinued.

I'm in Canada ... maybe old 2020 stock. Very cheap prices though, I think I paid like 35usd for 1k of 7 1/2

 

[sig2009]

I'm in Canada ... maybe old 2020 stock. Very cheap prices though, I think I paid like 35usd for 1k of 7 1/2

$35 is normal price here before the shutdown. ill be back to that in a few months.

 

[sig2009]

Are the 450s that much better for 6.5 creed ? Where I live, I have no problems getting Rem 7 1/2 and BR4s. I generally use the 7 1/2 for my 223 match and plan to use the BR4s for the 204 Ruger. I use Fed 205m on my 300blk bolt gun for subsonics.

Y ou have to try them and see what results you get. It is not a yes or no answer.