Gunsmithing Custom made thread adapter?

[pyplynr]

Has anyone ever had a custom made thread adapter made. I have a barrel that is threaded 5/8x24 and I’d like to use my 5.56 suppressor on that is 1/2x28. Does anyone know of where to get one made that’s say .9” in diameter to match up better with the barrel profile. I have found one online but it’s only about .750”

 

[RTH1800]

I have done it up size but not down. Either way it’s a bailing wire fix.
Be better to thread your barrel to the correct size.

 

[Easy_E]

http://www.thesilencerstore.com/index.php?main_page=product_info&cPath=59&products_id=122

This is what you after ?
http://www.thesilencerstore.com/index.php?main_page=product_info&products_id=37

 

[Threadcutter308]

Has anyone ever had a custom made thread adapter made. I have a barrel that is threaded 5/8x24 and I’d like to use my 5.56 suppressor on that is 1/2x28. Does anyone know of where to get one made that’s say .9” in diameter to match up better with the barrel profile. I have found one online but it’s only about .750”

You can find them on flea bay for about $20, maybe $30 for a reverse step. I bought a 1/2 x 28 to 5/8 x 24 from someone in AZ. It's made out of stainless and works just dandy. Don't forget the NAPA copper based anti-seize.

 

[pyplynr]

Those are the ones I’ve found, but they are smaller in overal diameter. I’d like to find someone to make one that would closely match my barrel diameter (roughly .900).

 

[Threadcutter308]

Those are the ones I’ve found, but they are smaller in overal diameter. I’d like to find someone to make one that would closely match my barrel diameter (roughly .900).

Personally, I wouldn't go to that much bother. Having said that, a local machine shop or gunsmith with a lathe could easily make it for you. It's do-able, but a local machine shop may charge $50 or more.

 

[Easy_E]

Those are the ones I’ve found, but they are smaller in overal diameter. I’d like to find someone to make one that would closely match my barrel diameter (roughly .900).

That first link says they do custom work if you cant find something.
T