1. What size is my dovetail?
Is it a 3/8" or 11 mm?
I measured it with calipers at the top, the wide section of thew dovetail and it's 11.3mm
& .445" or so. ?? That make sit clear as mud!
2.Also trying to figure the cost effective way to go on Rings & base.
I can get set up with Burriss Zee signature rings and an inset kit for plus moa for about $67.
It looks like a EGW base or DIP (forever back ordered? They're ignoring my multiple e-mails) >;(
will cost about $45 for a base and good rings about $45-50?
3. I noticed the barrel is pressing pretty/really firm against the right side of the barrel channel for the whole length of the forearms. I pulled it out of the stock several times and tried to get it centered but no dice. (452 American Varmint, wood stock)
What are 'smiths doing on these? Relieve the barrel channel on the right or??
Got the trigger light & slick last night. A little stoning & coaxing and it's now incredible. At least from my experience this particular unit- I can't believe there was so much "cz crappy trigger" talk going around.
Please advise & suggest...
Thanks,
Tres
Is it a 3/8" or 11 mm?
I measured it with calipers at the top, the wide section of thew dovetail and it's 11.3mm
& .445" or so. ?? That make sit clear as mud!
2.Also trying to figure the cost effective way to go on Rings & base.
I can get set up with Burriss Zee signature rings and an inset kit for plus moa for about $67.
It looks like a EGW base or DIP (forever back ordered? They're ignoring my multiple e-mails) >;(
will cost about $45 for a base and good rings about $45-50?
3. I noticed the barrel is pressing pretty/really firm against the right side of the barrel channel for the whole length of the forearms. I pulled it out of the stock several times and tried to get it centered but no dice. (452 American Varmint, wood stock)
What are 'smiths doing on these? Relieve the barrel channel on the right or??
Got the trigger light & slick last night. A little stoning & coaxing and it's now incredible. At least from my experience this particular unit- I can't believe there was so much "cz crappy trigger" talk going around.
Please advise & suggest...
Thanks,
Tres