Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
GunsmithingDillon Trim die, needs the neck opened up
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 1lnbrdg</div><div class="ubbcode-body">I have a .223 Dillon trim/resizing die. Looking for someone to open it up so it doesnt squeeze the neck down so much. Anyone do this kind of work? </div></div>
Nah dude, don't fu*k with it. Just run a die with an expander ball on the first station of your press once you go to load them. I deprime on station 1, trim on 3(with a 550B) and then swap toolheads over to load, so my prep is all done with the exception of expanding the neck, so.....yeah.
Btw, on the deprime station(if I'm doing .223) I have a .22-250 die in with a turned down deprimer/expander ball(so it isn't necking it up, then down in the trim/size die. No need to work harden your brass while you're prepping it. Die nor expander touch the case, only the decapping pin