Is there a minimum, maximum standard?
One of my rifles the pin only protrudes .029, (Factory set-up). If you subtract the primer seating depth,(.007) the net protrusion is .022. Seems short to me. All my others protrude .048 to .050.
I just had a missfire on the one with .029 protrusion and the primer showed a very light strike. Mark was like a very light tap with a center punch. Head space is correct.
Checked the bolt internals for anything that would interfear and all was as it should be, clean and lightly oiled.
One of my rifles the pin only protrudes .029, (Factory set-up). If you subtract the primer seating depth,(.007) the net protrusion is .022. Seems short to me. All my others protrude .048 to .050.
I just had a missfire on the one with .029 protrusion and the primer showed a very light strike. Mark was like a very light tap with a center punch. Head space is correct.
Checked the bolt internals for anything that would interfear and all was as it should be, clean and lightly oiled.
