Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
The site has been updated!
If you notice any issues, please let us know below!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Cvedrick</div><div class="ubbcode-body">Probably WAY too tall, I am using Warne Low rings for a similar build </div></div>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rezmedic54</div><div class="ubbcode-body">On a 20 MOA rail I use Millet medium angle loc rings and have about just over a 1/4 inch between the bottom of the bell and the barrel. </div></div>
Not using Millets, so that won't help.
thanks anyway.
I was able to clear a nightforce 50mm(actual 59mm obj) with IOR lows(.84inch) on a 0-MOA base with MTU contour barrel. You should be fine also with the 20 MOA base. NF has that ring size to clear the 50mm on a 20 MOA rail, is what my friend just told me so you are good to go with either.