• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Rifle Scopes Found my info on another site thanks anyway.

Re: Ring height vs. moa bases

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Cvedrick</div><div class="ubbcode-body">Probably WAY too tall, I am using Warne Low rings for a similar build </div></div>

Really ? .885" are lows on the NF rings. IIRC
 
Re: Ring height vs. moa bases

Not looking for a "Probably". Looking for a straight up answer.

My barrel is coming shortly and will be headed out for install. While it's there I need to locate the proper base and or ring/base combo.

Tim
 
Re: Ring height vs. moa bases

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rezmedic54</div><div class="ubbcode-body">On a 20 MOA rail I use Millet medium angle loc rings and have about just over a 1/4 inch between the bottom of the bell and the barrel. </div></div>

Not using Millets, so that won't help.
thanks anyway.
 
Re: Ring height vs. moa bases

I was able to clear a nightforce 50mm(actual 59mm obj) with IOR lows(.84inch) on a 0-MOA base with MTU contour barrel. You should be fine also with the 20 MOA base. NF has that ring size to clear the 50mm on a 20 MOA rail, is what my friend just told me so you are good to go with either.
 
Re: Ring height vs. moa bases (0-20)

I've been eyeing this tonight... http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2385328#Post2385328


cause it would look good with this....
grin.gif

IMG_0560.jpg
 
Re: Ring height vs. moa bases (0-20)

I like your stock, and I agree that the Duracoated base would look good with it.

Ironic you posted this, as I was looking at it for the same reason, to match up to a MacA5 that I have.
smile.gif