Full Auto LWRC REPR
- Thread starter 300LW
- Start date
Re: Full Auto LWRC REPR
lol...I need to practice my ninja roll. Wow they used alot of ammo for that video.
lol...I need to practice my ninja roll. Wow they used alot of ammo for that video.
Re: Full Auto LWRC REPR
So this may be dumb but. 1st thing I noticed on this Vid. was when the shooter did the FA fire with Multi-mag. change-outs . Why was there No 'last-round' bolt Hold-Open ??? . He manually cycled the Bolt for 1st round on every new Mag . with that model 308 ?
.
So this may be dumb but. 1st thing I noticed on this Vid. was when the shooter did the FA fire with Multi-mag. change-outs . Why was there No 'last-round' bolt Hold-Open ??? . He manually cycled the Bolt for 1st round on every new Mag . with that model 308 ?
.
Re: Full Auto LWRC REPR
Hmmmm, not, sure what you are referring to softcock. The bolt held open on every mag during the 'mag dump' portion. He did manually cycle the side charging handle to load the first round on a few mags.
Hmmmm, not, sure what you are referring to softcock. The bolt held open on every mag during the 'mag dump' portion. He did manually cycle the side charging handle to load the first round on a few mags.
Re: Full Auto LWRC REPR
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: softcock</div><div class="ubbcode-body">So this may be dumb but. 1st thing I noticed on this Vid. was when the shooter did the FA fire with Multi-mag. change-outs . Why was there No 'last-round' bolt Hold-Open ??? . He manually cycled the Bolt for 1st round on every new Mag . with that model 308 ?
.</div></div> Bolt held open, that's just how he released it.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: softcock</div><div class="ubbcode-body">So this may be dumb but. 1st thing I noticed on this Vid. was when the shooter did the FA fire with Multi-mag. change-outs . Why was there No 'last-round' bolt Hold-Open ??? . He manually cycled the Bolt for 1st round on every new Mag . with that model 308 ?
.</div></div> Bolt held open, that's just how he released it.
Re: Full Auto LWRC REPR
@softcock, it stays open he just pulls the side charging handle versus hitting the bolt release
@softcock, it stays open he just pulls the side charging handle versus hitting the bolt release
Re: Full Auto LWRC REPR
i didnt reload the page had to go back and watch it again to make sure, only beat me by 5 mins brasscow
i didnt reload the page had to go back and watch it again to make sure, only beat me by 5 mins brasscow
Re: Full Auto LWRC REPR
AHhhhh, L-side Bolt handle . Pretty Fing slick .
Never got into owning or shooting any .308 gas guns . nothing bad against them but I just don't care for them .
I have to admit that that .308 is a pretty nice looking Rig. even without the FA added .
.
edit to add:
I went back and watched it again & now I see that he did manually cycle the 1st round on the 1st, 6-7 Mags. but on the last couple in the pile he pushed/used the Bolt Release button.
.
.
AHhhhh, L-side Bolt handle . Pretty Fing slick .
Never got into owning or shooting any .308 gas guns . nothing bad against them but I just don't care for them .
I have to admit that that .308 is a pretty nice looking Rig. even without the FA added .
.
edit to add:
I went back and watched it again & now I see that he did manually cycle the 1st round on the 1st, 6-7 Mags. but on the last couple in the pile he pushed/used the Bolt Release button.
.
.
Re: Full Auto LWRC REPR
Great video - 2nd the comment on cost, would guess that isn't cheap...and the ammo cost would hurt to boot.
Great video - 2nd the comment on cost, would guess that isn't cheap...and the ammo cost would hurt to boot.
Re: Full Auto LWRC REPR
They need to improve their salt proof coating that thing was really rusty.
Cool video but I bet that barrel is trashed after that 12 mag dump.
They need to improve their salt proof coating that thing was really rusty.
Cool video but I bet that barrel is trashed after that 12 mag dump.
Re: Full Auto LWRC REPR
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: problemchild</div><div class="ubbcode-body">They need to improve their salt proof coating that thing was really rusty.
Cool video but I bet that barrel is trashed after that 12 mag dump. </div></div>
I'm not so sure. Those CHF nitrocarburized barrels can take some punishment and keep ticking.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: problemchild</div><div class="ubbcode-body">They need to improve their salt proof coating that thing was really rusty.
Cool video but I bet that barrel is trashed after that 12 mag dump. </div></div>
I'm not so sure. Those CHF nitrocarburized barrels can take some punishment and keep ticking.
Re: Full Auto LWRC REPR
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: problemchild</div><div class="ubbcode-body">They need to improve their salt proof coating that thing was really rusty.
Cool video but I bet that barrel is trashed after that 12 mag dump. </div></div>
Throw your AR in a salt bath that long and lets see how it turns out.... and the barrels will hold up just fine: I've got roughly 6k through my M6:
LWRCI™ rifles and carbines
utilize cold hammer forged
barrels made out of 41V45 steel
alloy (per Mil-B-11995E) and
treated with NiCorr™ surface
conversion technology. Cold
hammer forging takes a gundrilled
barrel blank and high
pressure rotary hammers compact
the barrel blank over a mandrel.
This forms perfect rifling devoid
of tool marks. It also compacts
the molecular structure of the
metal making it denser and
stronger. These barrels can take a
lot more use and abuse than a
standard barrel before any
degradation in accuracy or loss of
velocity. NiCorr™ surface
conversion has proved more
lubricious, harder wearing, more
heat and corrosion resistant than
the hard chrome normally used
in the bore. Our barrels can
handle 20,000 rounds before
replacement, as compared to
6000-10,000 rounds on a
standard M4.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: problemchild</div><div class="ubbcode-body">They need to improve their salt proof coating that thing was really rusty.
Cool video but I bet that barrel is trashed after that 12 mag dump. </div></div>
Throw your AR in a salt bath that long and lets see how it turns out.... and the barrels will hold up just fine: I've got roughly 6k through my M6:
LWRCI™ rifles and carbines
utilize cold hammer forged
barrels made out of 41V45 steel
alloy (per Mil-B-11995E) and
treated with NiCorr™ surface
conversion technology. Cold
hammer forging takes a gundrilled
barrel blank and high
pressure rotary hammers compact
the barrel blank over a mandrel.
This forms perfect rifling devoid
of tool marks. It also compacts
the molecular structure of the
metal making it denser and
stronger. These barrels can take a
lot more use and abuse than a
standard barrel before any
degradation in accuracy or loss of
velocity. NiCorr™ surface
conversion has proved more
lubricious, harder wearing, more
heat and corrosion resistant than
the hard chrome normally used
in the bore. Our barrels can
handle 20,000 rounds before
replacement, as compared to
6000-10,000 rounds on a
standard M4.
Re: Full Auto LWRC REPR
So, is the LWRC 308 lower such that one could put in a RDIAS? I know we peons wouldn't be able to buy one with original auto sear.
So, is the LWRC 308 lower such that one could put in a RDIAS? I know we peons wouldn't be able to buy one with original auto sear.
Re: Full Auto LWRC REPR
I don't believe a RDIAS will work. If there is enough interest maybe we can talk them into making a RDIAS compatible lower.
I don't believe a RDIAS will work. If there is enough interest maybe we can talk them into making a RDIAS compatible lower.
Re: Full Auto LWRC REPR
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HiTechTactical</div><div class="ubbcode-body">Wow. Impressive. Now do I get the OBR or REPR....hmmmm...</div></div>
Both!!!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HiTechTactical</div><div class="ubbcode-body">Wow. Impressive. Now do I get the OBR or REPR....hmmmm...</div></div>
Both!!!
Re: Full Auto LWRC REPR
I just had to have a moment to myself!
That has to be the baddest ass video I have seen in a long time!
I just had to have a moment to myself!
That has to be the baddest ass video I have seen in a long time!
Re: Full Auto LWRC REPR
Excellent video! I noticed the charging handle looks identicle to an Israeli FN FAL charging handle that acts as a foward assist when used with the appropriate bolt carrier. I'm wondering if it has the same function on the REPR?
Excellent video! I noticed the charging handle looks identicle to an Israeli FN FAL charging handle that acts as a foward assist when used with the appropriate bolt carrier. I'm wondering if it has the same function on the REPR?
Re: Full Auto LWRC REPR
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Badshot308</div><div class="ubbcode-body">Excellent video! I noticed the charging handle looks identicle to an Israeli FN FAL charging handle that acts as a foward assist when used with the appropriate bolt carrier. I'm wondering if it has the same function on the REPR? </div></div>
Yes it does.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Badshot308</div><div class="ubbcode-body">Excellent video! I noticed the charging handle looks identicle to an Israeli FN FAL charging handle that acts as a foward assist when used with the appropriate bolt carrier. I'm wondering if it has the same function on the REPR? </div></div>
Yes it does.
Here ya go:
REPR762mm.mp4 Video by Sleeper362 | Photobucket
I have about 3k rounds through mine now. The barrel does take a shit-ton of abuse, but the downside is it's not going to compete accuracy wise with a good SS barrel. Does everything I want it to, but I don't enjoy trying to print nice groups with it. But I have no hesitancy to shooting it like a M16 on steroids.
REPR762mm.mp4 Video by Sleeper362 | Photobucket
I have about 3k rounds through mine now. The barrel does take a shit-ton of abuse, but the downside is it's not going to compete accuracy wise with a good SS barrel. Does everything I want it to, but I don't enjoy trying to print nice groups with it. But I have no hesitancy to shooting it like a M16 on steroids.
You can buy mine . I have the 18" version and it's an absolute hammer. I probably have 200-300 rounds through it.
Email me if you're interested and I'll get you a price on it.
I would say a DI Gun would do just as well. You couldnt just pull the bolt out and touch it right after words. As long as everything is lubed up good. I know I have run combat Loads through my M4 on burst, mag after mag with no cool downs and it has made it 210 rnds with out a glitch.
