Suppressors Glock 36 failure to feed

aac_shooter

Silence is Golden
Full Member
Minuteman
Jul 8, 2010
941
656
The Hill Country, Texas
I am having an issue with my carry gun failing to feed. It is a Glock 36 and is hanging up with Winchester Ranger 230 sxt and Federal Hydra shock 230 ammo. The rounds are hanging on the bottom of the feed ramp. I don't really want to alter the feed ramp, but it is either that or ditch it and go back to the Glock 30. Is anyone else having this issue? If so, what did you do to fix it?
 
Re: Glock 36 failure to feed

My G19 is doing this as well with 147gr. Winchester PDX1 out of G17 mags but is fine with G19 mags. How do you change the feed ramp angle?
 
Re: Glock 36 failure to feed

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mm128</div><div class="ubbcode-body">Most likely a good polishing job on the feed ramp of the barrel will do the trick...

This has happened to me and was a easy fix.

Matt </div></div>

How do you polish them?
 
Re: Glock 36 failure to feed

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mr blasty</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mm128</div><div class="ubbcode-body">Most likely a good polishing job on the feed ramp of the barrel will do the trick...

This has happened to me and was a easy fix.

Matt </div></div>

How do you polish them? </div></div>

Probably not the best example, but you'll get the idea.
Hope this helps...
http://www.youtube.com/watch?v=2yahzMTOO34&p=5E68C7C78A5D1153&playnext=1&index=7
 
Re: Glock 36 failure to feed

Im sorry but I wouldnt be carrying something taht didnt feed properly. I run a minimum of 500 rounds of the ammo that I am going tio carry thru the gun that I am going to use it in and it MUST function flawlessly for those 500 rounds. If I have a problem at 498.... start over.
 
Re: Glock 36 failure to feed

I had the same issued where the spent case would extract but the live round would get hung up on the feed ramp.

I solved it with a wolff extra power (23 lb) spring and guide rod. I purchased both from Midway USA.
 
Re: Glock 36 failure to feed

I have seen this happen, I think the new spring will help. Give it a good workout before you carry it for protection. Also be certain you are not limp wristing it, my wife has trouble with that on her glock.