Gunsmithing In need of CTC dimension for Viper Barre Vise

[Estes640]

Does anyone have a drawing of the base plate of the viper barrel vise? Specifically, overall length, center to center of the two mounting holes, and hole diameter. I am looking to make a hitch mount at work today just forgot my vise and hopefully someone can help me out before I'm gone for the weekend.

Ryan

 

[spife7980]

I found this on the brownells website under the specs tab brownells viper link

"SPECS: Base is 7" x 3" with 5 3/4" c-t-c hole spacing for mounting; top plate is 3" square; four 1/2" bolts for clamping; and will accommodate 0.750" to 1" OD barrels."

 

[Estes640]

I found this on the brownells website under the specs tab brownells viper link

"SPECS: Base is 7" x 3" with 5 3/4" c-t-c hole spacing for mounting; top plate is 3" square; four 1/2" bolts for clamping; and will accommodate 0.750" to 1" OD barrels."

I swear I looked at that! Thanks for being my sanity check. I appreciate it bud, you saved me a trip.

Ryan