Suppressors KGM R30/R30T OR TBAC MAGNUS RR

JRBullock1987

Sergeant of the Hide
Full Member
Minuteman
Supporter
Sep 8, 2023
232
48
Washington
About to get my bartlein barrel back from being chambered in 6.5cm over at spr for my new lone peak fusion action and want to get a new dedicated suppressor for precision shooting. Theres really just two things that im looking for and its suppression and accuracy. I dont care about a poi shift when the suppressor is either on or off as long as the shift is repeatable. For accuracy Im wanting the suppressor to at a bare minimum keep my rifles accuracy with it on as it is when its off but am really looking for a suppressor thatll tighten up the groups and make them smaller if possible. So ive widdled the list down to two suppressor (well technically 4). The KGM
-R30
-R30T
or the TBAC
-MAGNUS (Full sized 30 cal)
-MAGNUS RR (Full sized 30 cal)
So let me know which you think will work better for a precision rifle setup for both sound and accuracy!? Or if there's a better one than these two put them in the comments.
Thanks,
Justin
 
I have the KGM R65(discontinued now) and the TBAC Ultra 7 in 6.5. They both are super lightweight and, if anything, improve my groups when they are on the guns. I shoot the KGM with the recoil ports open, so it is noticeably louder than the TBAC. I have zero complaints with either one, but if you're going for quiet, go with TBAC
 
  • Like
Reactions: JRBullock1987
Do you care about length/size? Do you care about recoil reduction/impulse?

The straight Magnus is what you want if you don’t care about length or size. It will be the quietest and most accurate can you can buy. If size is a concern, you could look at the shorter length Magnus (k or s). They are all great.

There’s no reason to consider the RR models unless you are worried about reducing recoil impulse. For general accuracy, it doesn’t matter. For seeing impacts and making precision corrections, think PRS style competitions, the RR models are what you want. The trade off is that the RR models are louder for the same size can.

I have a pile of TBAC cans: Magnus, Dominus, Ultra 7, Magnus K-RR. All of them either sustain my rifles no-can accuracy or improve my group size from prone. Where I see a difference is the increase in duration and feel of the recoil impulse when shooting from improvised positions compared to using a muzzle brake. For me, the balance between sound reduction and recoil mitigation while saving my brain from concussion is the Magnus K-RR.
 
Do you care about length/size? Do you care about recoil reduction/impulse?

The straight Magnus is what you want if you don’t care about length or size. It will be the quietest and most accurate can you can buy. If size is a concern, you could look at the shorter length Magnus (k or s). They are all great.

There’s no reason to consider the RR models unless you are worried about reducing recoil impulse. For general accuracy, it doesn’t matter. For seeing impacts and making precision corrections, think PRS style competitions, the RR models are what you want. The trade off is that the RR models are louder for the same size can.

I have a pile of TBAC cans: Magnus, Dominus, Ultra 7, Magnus K-RR. All of them either sustain my rifles no-can accuracy or improve my group size from prone. Where I see a difference is the increase in duration and feel of the recoil impulse when shooting from improvised positions compared to using a muzzle brake. For me, the balance between sound reduction and recoil mitigation while saving my brain from concussion is the Magnus K-RR.
No i dont care about size or recoil impulse really. Obviously the better the recoil control the easier it is see your shots but im not shooting a magnum cartridge so recoil isn't at the top of my list. Mainly sound/tone and accuracy. Poi doesn't matter to me as long as its repeatable. Other than that im not worried about it.