Re: KRG Whiskey 3 Chassis-Let's See Them
Hi guys, I'll add some more info to this thread:
-The Victor Co grippy cheek piece kit is near completed but it will take some time to get up on the site, pics, etc.
-The gen 3 folders have been shipping for a little while but there's a substantial list to get through.
-We did ship Badger a few folders so contact them quickly.
-The TRG bipod will NOT work with the Spigot Mount. The spigot mount goes in the hole that the TRG bipod uses. The spigot mount is for a rail or sling stud mounted bipod and it really adds some nice stability. The TRG bipod WILL fit into a W3C but the steel catch on the TRG bipod will likely gouge the aluminum W3C over time. The TRG stock has a steel plate there, and in theory you can take the steel plate off the TRG and put it on the W3C.
-The TRG forend is a very nice shape. Unfortunately the only way to really manufacture a shape like that is cast polyurethane or aluminum (Sako uses polyurethane). Also unfortunately is that the TRG magazine well is just slightly out of position to use on the Rem. The TRG forend will fit onto a W3C but will need two holes drilled for those long screws that hold it on.
-The TRG folder that we make, which is what you see on the brown TRG, is nearly identical to the back half of the Whiskey-3. The only change is the grip panel on the right side. The Rem 700 has a bigger cutout for the larger bolt handle and the 90 degree throw.
-The W3C is just the logical follow-up to two of our first ideas, one was the AICS mag conversion for the TRG-22, and the other was the TRG folding back end. So the W3C is basically a direct descendant of TRG hop-up parts.
Thanks guys!
Justin
-Also, the Badger IMUNS NV mount is nearly complete as well, same thing as the cheek piece, it will take time to get on the site, pics, etc. The Sako ITRS mount will bolt to the Spigot Mount as another option. With the big move, SHOT, and the holidays, it's a busy place here.