Accessories Machinist tools: lathe chucks, Yuasa Air Indexer, etc.

[smoooth1]

Have 11 used Cleveland coolant thru 29/64” slow twist drills in various lengths. The shorter ones in the pics had the shank cut off, so the stamp and size are missing.
$20 shipped for all.

Yuasa 550-015 Air Accudex vertical / horizontal indexer w/ 10” T-slot table. Table can be removed and replaced with an 8” adjust-tru type chuck (not included). Electronic relay controls the air cylinder for the indexing operation; could easily be wired into a CNC mill or operated by hand with an in-line switch (included). 7.5* minimum indexing angle. Can send pics of the spec sheet to anyone interested. Recently took it apart, cleaned and lubricated, replaced a spring, everything works as it should.
$900 + shipping / freight, FTF in central MN, or possibly delivery if not too far away.


Buck 2154 A8 15” 3 jaw Chuck (4” thru hole) mounted on a 20” diameter steel plate for use in a vertical machining center or mill, can be removed for use on a lathe. Comes with 3 sets of jaws, 2 jaw stop / work stops, T wrench and lifting eye. Chuck is clean, operates smoothly and easily.
$2100 + freight, FTF in central MN or possibly delivery can be worked out.

Listed elsewhere. Thanks for your interest.

 

[smoooth1]

Jacobs Rubberflex Collet Chuck #91 C3 (D1-3 mount).
Clean and operates smoothly. Threads on both the chuck and collet nose are excellent.
No collets included.
$325 shipped. SOLD

 

[smoooth1]

Pics added.

 

[smoooth1]

Up

 

[smoooth1]

Offers welcome.

 

[smoooth1]

Anyone?

 

[clem81]

What about the collets do you have any to throw in. What are the max and min size collets what is the through hole

 

[smoooth1]

As clearly stated in the ad, no collets included.

The thru hole is approximately 1.40", not going to dig out a bore gage to measure it precisely.

Below is an ebay link to a complete set. Each collet covers an 1/8" range from 1/16"-1 3/8". They are still being produced.

Jacobs Rubber Flex Collets -NOS- Set 1/16 - 1-3/8 with all Plugs Plywoodcase | eBay

11 Rubber Flex Collets from J910 - J920. New and unused Jacobs Rubber Flex Collet Set, includes 10 Rubber Plugs. plus the original Plywoodbox, but the plugs fits not in the plywood box.

www.ebay.com

Thanks for your interest.

 

[smoooth1]

Hardinge-Sjogren No.2 D8 (D1-8). It takes 2J collets, 12 are included. 10 Hardinge, 1 Rivett, 1 unknown 1/4”.
It operates smoothly, but when spinning the hand wheel there is some light rubbing sound (can take a video if you want). I’ve never used one of these so I don’t know if that’s normal or not . The tab inside is in very good condition, threads are smooth and clean.
1 5/8” thru, 1 3/8” max collet size.
Could remove the cam lock pins and mount it in a mill for production work.

Would trade for a D1-6 3J model or sell for $425 shipped and insured. SOLD!

Listed elsewhere.

 

[smoooth1]

Offers???

 

[smoooth1]

Trades????

 

[smoooth1]

Jacobs Rubberflex collet chuck is SOLD, everything else still available and open to offers.

 

[smoooth1]

Up

Hardinge Sjogren Collet chuck is SOLD

 

[smoooth1]

Open to offers

 

[smoooth1]

15” Buck Chuck and Yuasa indexer still available and open to offers.