Where can I get one of these mounts?
I know I've seen them somewhere but my CRS is in full swing today.
I know I've seen them somewhere but my CRS is in full swing today.
MagPul PRS QD Swivel Mount
- Thread starter Dennis_in_VA
- Start date
Re: MagPul PRS QD Swivel Mount
Thanks
That's not where I thought I saw them but this will do.
The place I saw them before had the PRS stock and a list of accessories that included this sling mount.
Thanks
That's not where I thought I saw them but this will do.
The place I saw them before had the PRS stock and a list of accessories that included this sling mount.
Re: MagPul PRS QD Swivel Mount
Brownell's sells them as well. IMO the Cascadia ones are much better.
Brownell's sells them as well. IMO the Cascadia ones are much better.
Re: MagPul PRS QD Swivel Mount
+1 for Cascadia
http://www.snipershide.com/forum/ubbthre...970#Post2500970
+1 for Cascadia
http://www.snipershide.com/forum/ubbthre...970#Post2500970
Re: MagPul PRS QD Swivel Mount
That's exactly what I need! I didn't know it was even made! Glad I found this thread!
That's exactly what I need! I didn't know it was even made! Glad I found this thread!
Re: MagPul PRS QD Swivel Mount
I just ordered a MagPul PRS stock for my brother for Christmas.
I also got him a VTAC sling
Will I be needing those mounts?
Will the VTAC come with all the hardware to mount it. If not what will I need?
I will be installing the PRC on a RRA LAR-15.
Everything I've found and RRA says it's a drop-in when replacing the A2 stock.
Do I need anything else to mount it?
With it being his Christmas present I want to have everything I need to to complete it.
I just ordered a MagPul PRS stock for my brother for Christmas.
I also got him a VTAC sling
Will I be needing those mounts?
Will the VTAC come with all the hardware to mount it. If not what will I need?
I will be installing the PRC on a RRA LAR-15.
Everything I've found and RRA says it's a drop-in when replacing the A2 stock.
Do I need anything else to mount it?
With it being his Christmas present I want to have everything I need to to complete it.
Re: MagPul PRS QD Swivel Mount
Glad that I checked out this thread. Been wondering about a QD mount for my PRS. This site has got to be the best place for finding obscure pieces of gear that I have ever come across.
Glad that I checked out this thread. Been wondering about a QD mount for my PRS. This site has got to be the best place for finding obscure pieces of gear that I have ever come across.
Re: MagPul PRS QD Swivel Mount
If you are planning on running the pushbutton QD swivels with the sling, yes, you will need them. The standard mounts on a PRS do not allow for use of the QD swivels.
As for the VTAC, it depends on how/where you purchased it. I just ordered a VTAC padded sling, and had to order the QD swivels separately.
If you are planning on running the pushbutton QD swivels with the sling, yes, you will need them. The standard mounts on a PRS do not allow for use of the QD swivels.
As for the VTAC, it depends on how/where you purchased it. I just ordered a VTAC padded sling, and had to order the QD swivels separately.
Re: MagPul PRS QD Swivel Mount
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Don-n-Texas</div><div class="ubbcode-body">I just ordered a MagPul PRS stock for my brother for Christmas.
I also got him a VTAC sling
Will I be needing those mounts?
Will the VTAC come with all the hardware to mount it. If not what will I need?
I will be installing the PRC on a RRA LAR-15.
Everything I've found and RRA says it's a drop-in when replacing the A2 stock.
Do I need anything else to mount it?
With it being his Christmas present I want to have everything I need to to complete it.
</div></div>
I would get at least one QD from Cascadia. The stock loop holes really don't work for anything but just that, so if you want to easily remove the sling you'll want it.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Don-n-Texas</div><div class="ubbcode-body">I just ordered a MagPul PRS stock for my brother for Christmas.
I also got him a VTAC sling
Will I be needing those mounts?
Will the VTAC come with all the hardware to mount it. If not what will I need?
I will be installing the PRC on a RRA LAR-15.
Everything I've found and RRA says it's a drop-in when replacing the A2 stock.
Do I need anything else to mount it?
With it being his Christmas present I want to have everything I need to to complete it.
</div></div>
I would get at least one QD from Cascadia. The stock loop holes really don't work for anything but just that, so if you want to easily remove the sling you'll want it.
Re: MagPul PRS QD Swivel Mount
I decided to ordered them last night. After getting some good information here last night. I think he would really like having them.
I decided to ordered them last night. After getting some good information here last night. I think he would really like having them.
Similar threads
