Maggie’s Motivational Pic Thread v2.0 - - New Rules - See Post #1

1752791015166.png
 
Pussy! A real man would have cut a hole in the drywall big enough for a hammer drill and anchored that wall properly! 😁

ETA... I actually would have and then just patched the rock.
That would be the right way to do it, but by the time I got to that I was so disgusted I just wanted it over with. I've bought and sold 8 homes and that is the only one I lost money on.

To anyone who ends up at Ft. Sill, dont buy, just rent until you can get out of Lawton, LOL. Just kidding its not that bad of town but doesnt have much to offer the youth.
 

Not sure if this is real or not, but received a similar notice shortly after I retired back in 2015; I actually had to go back in and get “read in” before I was briefed. Of course there was no paperwork for me to take with me, but very similar…and a lot more details of course.

If real, I don’t know if I’m more disturbed, or more pleased that they’ve actually put this out in the open. Interesting.

Hope it’s fake news, but with the folks we've let in with zero vetting over the past few years, I wouldn’t be surprised by much of anything going down. 🫤

Pic thread rules: Got the cams test fit in my truck’s ported and rebuilt heads:

i-7NRD6vp-X4.jpg


Now just waiting for the block to be finished by the machine shop.
 
Last edited:
Not sure if this is real or not, but received a similar notice shortly after I retired back in 2015; I actually had to go back in and get “read in” before I was briefed. Of course there was no paperwork for me to take with me, but very similar…and a lot more details of course.

If real, I don’t know if I’m more disturbed, or more pleased that they’ve actually put this out in the open. Interesting.

Hope it’s fake news, but with the folks we've let in with zero vetting over the past few years, I wouldn’t be surprised by much of anything going down. 🫤

Pic thread rules: Got the cams test fit in my truck’s ported and rebuilt heads:

i-7NRD6vp-X4.jpg


Now just waiting for the block to be finished by the machine shop.
Heard about that notice on a podcast today that’s usually reliable, but you know how internet shit be
 
  • Like
Reactions: Barneybdb