• Frank's Lesson's Contest

    We want to see your skills! Post a video between now and November 1st showing what you've learned from Frank's lessons and 3 people will be selected to win a free shirt. Good luck everyone!

    Create a channel Learn more
  • Having trouble using the site?

    Contact support

Need advice

MeanJeane

Long time lurker
Full Member
Minuteman
Dec 8, 2010
6
0
42
Claysville Pa
Im new to reloading. I am on my 4th time reloading a lot winchester 300wm brass. After recently reloading them for the 3rd time I prepped again to reload and every single peice of brass will not hold a bullet. The bullet will fall right in. The load is 73 grains of h1000 and 208 amax. What does this mean. Ive searched and didnt quite find an answer to my question. I can with no resistance push and pull a bullet in and out of each peice of brass.
 
Re: Need advice

Sure your die was turned down enough. Sounds like it didn't get enough neck tension. Also are you using the expander?
 
Re: Need advice

I meant turned the die all the way down to the shell holder. Not the seater.

That's why I asked about the expander as well.