newbie with new rifle
- Thread starter awmp
- Start date
Something like this might work. https://ads.midwayusa.com/product/2...prJnNAgYKxU8i2ypEMrdoz-H4YebxNzxoCor4QAvD_BwE
see if that works better: https://www.midwayusa.com/product/226862/atlas-bipod-flush-cup-1913-flat-back-rail-4-steel-black
The new link is working now, at least for me.
I have a new Bergara HMR in .300WM and am looking for a rail solution vs the studs to mount a bipod as well. If you get this and try it out can you please post the result?
Anyone tried this product on their HMR?
Thank you for the link, that got me to looking in the right direction.
Brownells has two different sizes (link below), I'm at work so I can't measure the distance between the studs, but I will when I get home and see how it works out, more to follow.
Update-I called Begara and they measured the studs for me, 3" so you will need the 4" rail and that is what I ordered.
www.brownells.com
Brownells has two different sizes (link below), I'm at work so I can't measure the distance between the studs, but I will when I get home and see how it works out, more to follow.
Update-I called Begara and they measured the studs for me, 3" so you will need the 4" rail and that is what I ordered.
ATLAS BIPOD HANDGUARD ATLAS BIPOD ACCESSORY RAIL | Brownells
Atlas 1913 Rails serve as attachment points for Atlas Bipods that fit Picatinny rails. 3.35" rail accommodates hole patterns with 1.76" to 2.78" center-to-center spacing and fits onto curved surfaces. 4" rail accommodates hole patterns with 2.2" t...
www.brownells.com
Last edited:
The BT-17 linked above appears to be the correct one for the 3.2" spacing the HMR has. See the thread below.
https://www.snipershide.com/shooting/threads/bergara-b14-hmr.6305560/
https://www.snipershide.com/shooting/threads/bergara-b14-hmr.6305560/
I actually have that one coming in tomorrow and I'm going to compare them, I was told the Area 419 would require some drilling of the stock so I will have to wait and see if that is true.
The area419 rail (https://www.area419.com/product/imroved-bipod-rail-ibr-straight/) should not require any drilling. It has a long slot as well as holes that will line up with the locations on the current bipod studs. You'd have to get extremely unlucky for that setup to not line up with the holes already in your stock.
- Accommodates anywhere from 1.5″ – 3.475″ center on center screw hole spacing. If you are closer to the 1.5″ spacing, we do not suggest using the flush cup mount for carrying the rifle, it will just have too much leverage and may tear the thread insert out of the stock.:
Hello AWMP,
Thank you very much for posting how it worked out for you. That looks like it fits the bill perfectly. Area419 is about to get a new customer. I am going to order the same thing for my HMR .300 too.
Best regards,
Similar threads
