Just ordered a MK18. Was wondering if anyone had pics of their setup with a T-1 Micro and Magpul CTR stock?
Noveske MK18
- Thread starter mike1128
- Start date
Re: Noveske MK18
This is the Noveske 7.5" barrel with the KX3, which makes it about the same length as the Mk18 barrel.
Not the same, but similar setup for comparison.
This is the Noveske 7.5" barrel with the KX3, which makes it about the same length as the Mk18 barrel.
Not the same, but similar setup for comparison.
Re: Noveske MK18
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rem_.308</div><div class="ubbcode-body">Very nice as well. I bet that 7.5 is louuud</div></div>
Yeah, I get a lot of complaints.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rem_.308</div><div class="ubbcode-body">Very nice as well. I bet that 7.5 is louuud</div></div>
Yeah, I get a lot of complaints.
Re: Noveske MK18
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rem_.308</div><div class="ubbcode-body">DAMN that is nice. How do you like that riser cheek piece from larue? </div></div>
I like it but it is too high for a lot of the guys who have tried mine.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rem_.308</div><div class="ubbcode-body">DAMN that is nice. How do you like that riser cheek piece from larue? </div></div>
I like it but it is too high for a lot of the guys who have tried mine.
Re: Noveske MK18
OK nothing Spec MK18 on either of those rigs but those are two amazingly sexy builds esp Phylodog's!
Sucks to live in a non SBR state, closest I could do was 13.5 with perm attached muzle device.
Miss my issue MK18
OK nothing Spec MK18 on either of those rigs but those are two amazingly sexy builds esp Phylodog's!
Sucks to live in a non SBR state, closest I could do was 13.5 with perm attached muzle device.
Miss my issue MK18
Re: Noveske MK18
I can see through the irons fine but I plant my cheek down farther than most. I have a lower third setup as it is which allows me to see the dot without having my cheek down all the way. A lower mount for the T1 wouldn't really do all that much.
I can see through the irons fine but I plant my cheek down farther than most. I have a lower third setup as it is which allows me to see the dot without having my cheek down all the way. A lower mount for the T1 wouldn't really do all that much.
Re: Noveske MK18
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Phylodog</div><div class="ubbcode-body">I can see through the irons fine but I plant my cheek down farther than most. I have a lower third setup as it is which allows me to see the dot without having my cheek down all the way. A lower mount for the T1 wouldn't really do all that much.</div></div>
Makes sense enough.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Phylodog</div><div class="ubbcode-body">I can see through the irons fine but I plant my cheek down farther than most. I have a lower third setup as it is which allows me to see the dot without having my cheek down all the way. A lower mount for the T1 wouldn't really do all that much.</div></div>
Makes sense enough.
Re: Noveske MK18
Ok guys one more question. I was going to replace the H2 buffer with the Enidine Hydraulic Recoil Buffer. Would this be a proper swap or should I just leave the H2 buffer? The barrel is 10.5" just as a reminder.
Ok guys one more question. I was going to replace the H2 buffer with the Enidine Hydraulic Recoil Buffer. Would this be a proper swap or should I just leave the H2 buffer? The barrel is 10.5" just as a reminder.
Re: Noveske MK18
I wouldn't mess with it without consulting Noveske. SBR gas systems are very finicky and that buffer could change the unlock time and cause reliability issues.
Jason
I wouldn't mess with it without consulting Noveske. SBR gas systems are very finicky and that buffer could change the unlock time and cause reliability issues.
Jason
Re: Noveske MK18
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SSSamurai</div><div class="ubbcode-body">I wouldn't mess with it without consulting Noveske. SBR gas systems are very finicky and that buffer could change the unlock time and cause reliability issues.
Jason </div></div>
+1 Consult Noveske their techs are very helpful.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SSSamurai</div><div class="ubbcode-body">I wouldn't mess with it without consulting Noveske. SBR gas systems are very finicky and that buffer could change the unlock time and cause reliability issues.
Jason </div></div>
+1 Consult Noveske their techs are very helpful.
Re: Noveske MK18
Finally my Noveske MK18 came in and went and saw it today. Now have to wait for the tax stamp to be approved.
Finally my Noveske MK18 came in and went and saw it today. Now have to wait for the tax stamp to be approved.
Re: Noveske MK18
Waiting on the tax stamps really does suck. That's why I just regestered a lower and order SBR uppers separate.
Waiting on the tax stamps really does suck. That's why I just regestered a lower and order SBR uppers separate.
Re: Noveske MK18
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jakhamr81</div><div class="ubbcode-body">Waiting on the tax stamps really does suck. That's why I just regestered a lower and order SBR uppers separate.</div></div> amen to that.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jakhamr81</div><div class="ubbcode-body">Waiting on the tax stamps really does suck. That's why I just regestered a lower and order SBR uppers separate.</div></div> amen to that.
