• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Rifle Scopes NXS compact FC-2 reticle,hold over experience?

angelone

Sergeant
Minuteman
May 16, 2009
92
1
56
Austria/EUROPE
Has anyone used the FC-2 reticle on the NXS 1-4x for hold over snap shots with AR15?
Original manual from NXS 1-4x :
"The triangular aiming point under the circle can be used as a
10 M.O.A. holdover point from the center dot, and as a ranging
tool in combination with the circle and dot."

so when zero at 100y/m with the 10MOA holdover can be 300y/m ???
 
Re: NXS compact FC-2 reticle,hold over experience?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: angelone</div><div class="ubbcode-body">Has anyone used the FC-2 reticle on the NXS 1-4x for hold over snap shots with AR15?
Original manual from NXS 1-4x :
"The triangular aiming point under the circle can be used as a
10 M.O.A. holdover point from the center dot, and as a ranging
tool in combination with the circle and dot."

so when zero at 100y/m with the 10MOA holdover can be 300y/m ???
</div></div>

I have one on a 16" middy. For me, the dot is held slightly higher on the target (12" x 12" steel) The bottom of the circle for 300, the top of the triangle center for 400 and the bottom of the triangle center for 500. I went to 600 and held approx. 2 1/2' over. Works well for me with that set up.

Mark
 
Re: NXS compact FC-2 reticle,hold over experience?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: angelone</div><div class="ubbcode-body">Great Thanks,will check it and report this here after life fire,my AR is a M4 with 14,5" barrel and will shoot out to 500
stay in touch </div></div>

You might have a tad more hold over, depending on your ammunition. I used PMC 55 grain ball which is at 2925 average for me from a 16" barrel.