Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
have an MTU(m24) contour barrel. what height rings will I need to keep the 50mm objective of my nightforce at adequate height above the barrel? I'll go ahead and buy the 4 screw 30mm rings.
The medium high rings is what I use and it works well for the 50mm nightforce on a factory 700 sps. Gives just enoguh clearance to fit butler creek caps or the bikini cover.
hmm..... well I have a huge barrel. it's an MTU contour BLANK and was cut to 22 inches. so it's basically like an 8.5 contour since it was 30 inches long when it first arrived. It's almost flat taper but not quite.
ok order placed with liberty optics. w00t. no more silly PRI base and TPS rings(that I fucked up. These actually were nice, but I couldn't find any TPS bases to go with it so....)
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pdd614</div><div class="ubbcode-body">seekins could charge two hundred dollars for his rings, and i would still have no problem buying them. they are that nice. </div></div>
lol. well just ordered from libertyOptics. hopefully it gets here before saturday so I can find someone who knows more than I do to help me install them because I really did a monkey job on the pri base and tps rings. What's the general consensus on installing a scope base? you don't HAVE to bed it do you?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rhys</div><div class="ubbcode-body">He's not doing the 6 screw any more </div></div>Correct and that is straight from Glen himself.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: hill billy</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rhys</div><div class="ubbcode-body">He's not doing the 6 screw any more </div></div>Correct and that is straight from Glen himself. </div></div>