have an MTU(m24) contour barrel. what height rings will I need to keep the 50mm objective of my nightforce at adequate height above the barrel? I'll go ahead and buy the 4 screw 30mm rings.
Re: Ok buying seekins
The medium high rings is what I use and it works well for the 50mm nightforce on a factory 700 sps. Gives just enoguh clearance to fit butler creek caps or the bikini cover.
The medium high rings is what I use and it works well for the 50mm nightforce on a factory 700 sps. Gives just enoguh clearance to fit butler creek caps or the bikini cover.
Re: Ok buying seekins
hmm..... well I have a huge barrel. it's an MTU contour BLANK and was cut to 22 inches. so it's basically like an 8.5 contour since it was 30 inches long when it first arrived. It's almost flat taper but not quite.
hmm..... well I have a huge barrel. it's an MTU contour BLANK and was cut to 22 inches. so it's basically like an 8.5 contour since it was 30 inches long when it first arrived. It's almost flat taper but not quite.
Re: Ok buying seekins
ok order placed with liberty optics. w00t. no more silly PRI base and TPS rings(that I fucked up. These actually were nice, but I couldn't find any TPS bases to go with it so....)
ok order placed with liberty optics. w00t. no more silly PRI base and TPS rings(that I fucked up. These actually were nice, but I couldn't find any TPS bases to go with it so....)
Re: Ok buying seekins
You know what stucks about Seekins rings?
Their rings are so well designed that you will be addicted to them forever.
You know what stucks about Seekins rings?
Their rings are so well designed that you will be addicted to them forever.
Re: Ok buying seekins
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pdd614</div><div class="ubbcode-body">seekins could charge two hundred dollars for his rings, and i would still have no problem buying them. they are that nice. </div></div>
You don't say??? Hmmmmm
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pdd614</div><div class="ubbcode-body">seekins could charge two hundred dollars for his rings, and i would still have no problem buying them. they are that nice. </div></div>
You don't say??? Hmmmmm
Re: Ok buying seekins
^^^you are doing good because you're not price gouging like most other suppliers, but I wouldn't blame you if you did
^^^you are doing good because you're not price gouging like most other suppliers, but I wouldn't blame you if you did
Re: Ok buying seekins
lol. well just ordered from libertyOptics. hopefully it gets here before saturday so I can find someone who knows more than I do to help me install them because I really did a monkey job on the pri base and tps rings. What's the general consensus on installing a scope base? you don't HAVE to bed it do you?
lol. well just ordered from libertyOptics. hopefully it gets here before saturday so I can find someone who knows more than I do to help me install them because I really did a monkey job on the pri base and tps rings. What's the general consensus on installing a scope base? you don't HAVE to bed it do you?
Re: Ok buying seekins
Hey, PDD614 don't give them any ideas
!!! Their rings and at those prices are unbeatable.
Hey, PDD614 don't give them any ideas
!!! Their rings and at those prices are unbeatable.Re: Ok buying seekins
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rhys</div><div class="ubbcode-body">He's not doing the 6 screw any more
</div></div>Correct and that is straight from Glen himself.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rhys</div><div class="ubbcode-body">He's not doing the 6 screw any more
</div></div>Correct and that is straight from Glen himself.
Re: Ok buying seekins
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: hill billy</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rhys</div><div class="ubbcode-body">He's not doing the 6 screw any more
</div></div>Correct and that is straight from Glen himself. </div></div>
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1119587#Post1119587
You were saying?????????
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: hill billy</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rhys</div><div class="ubbcode-body">He's not doing the 6 screw any more
</div></div>Correct and that is straight from Glen himself. </div></div>
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1119587#Post1119587
You were saying?????????
