• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Precision Rifles.....show em!!

DACAC07C-A799-4D8F-91F4-D139C41BCD0C.jpeg


Well, all set up now!!! Travis did a stellar job!!! Now to shoot it!

•TS Customs build
•Lone Peak Fuzion SS Nitride coated copper w/ TT Special Two-Stage
•Hawkins bottom metal w/ flush mag and offset lite rings coated copper
•Proof 22” Sendero 1:10tw chambered 300wsm
•TS Customs KS1A stock cracked copper ambush
•TBAC Dominus
•Tangent Theta TT315M Gen 2 Mildot
 

Attachments

  • 219000E8-FE58-4C52-95A2-6F3349B0AEE4.jpeg
    219000E8-FE58-4C52-95A2-6F3349B0AEE4.jpeg
    847 KB · Views: 142
  • CBD24F06-F3B3-43E6-B297-42DBFEFD717B.jpeg
    CBD24F06-F3B3-43E6-B297-42DBFEFD717B.jpeg
    731.2 KB · Views: 147
I'll get this thread started again


26" Bartlein M24 .260Rem
Stiller TAC30
Murphy Precision 20MOA Scope Base
XLR Element Folding Chassis
Kampfeld Customs Brake
Jewel HVR 14oz
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 0.92" 34mm Rings
Barrel and Scope Base cerakoted Snipers Grey
Action is melonite from factory




bHwJ5j3.jpg



Patriot Valley Arms
26" Bartlein M24 6.5x47L
Bighorn TL3
Receiver DLC / Bolt NP3
XLR Element Folding Chassis
Jewel HVR 14oz
Rugged Suppressors 3 Port QD Brake
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 1.26" 34mm Rings



Mfgezb4.jpg

nnk1Ni7.jpg

ZPV65Nw.jpg
How do you like those rings?
 
2022 GAP PPR in 6GT
One of the 30 in their first batch PPR. Straight from the box ~14.5lb with their weighted rail similar to area419. Their GAP #8 contour is sure girthy, probably a bit bigger than MTU.
 

Attachments

  • 7BAB6C1B-AC59-4E37-B189-EF927E0F1425.jpeg
    7BAB6C1B-AC59-4E37-B189-EF927E0F1425.jpeg
    669.4 KB · Views: 221
  • B7A41014-30E3-4629-BB12-255EE808DDAF.jpeg
    B7A41014-30E3-4629-BB12-255EE808DDAF.jpeg
    366.8 KB · Views: 217
  • 2CC1C0A1-70A0-4CD7-93AD-E39591BB1953.jpeg
    2CC1C0A1-70A0-4CD7-93AD-E39591BB1953.jpeg
    329.4 KB · Views: 220
View attachment 7945383My Lord does Travis @ TS Customs puts out some work art. What a beauty!!! Should be getting it next week sometime.

•Lone Peak Fuzion SS Nitride coated in copper orange
•Proof Sendero 22” 1:10tw 300wsm copper orange ends
•TS Customs KS1 Adjustable stock in a black, od green, grey, light grey ambush w/ copper orange cracked lines
•Hawkins Precision bottom metal w/ hunter mag copper orange
• TT Special 2 stage

Will be putting a TT315M Gen 2 MilDot on top sitting in some copper orange coated Hawkins rings… a TBAC ODG Dominus will be hanging off the end.

Travis is the man. He does amazing work!
 
  • Like
Reactions: HenryTheAce
What were the problems you had w ZCO and did they not resolve them to your satisfaction? Just curious.
Had 3 of the 5 fail with Parallax/Focus issues .... I returned all 5 to my dealer for a full refund. He also returned his entire stock to ZCO scopes until he can be assured the issue is actually corrected by ZCO.. .

I am NOT the only one to return scopes due to this issue..

Its a pleasure to go back to S&B ...as well as a confidence boost..
 
Picked this beauty up from SAC last friday.

6.5 Creedmoor
Defiance Ruckas Tactical action
26" Bartlein Barrel 1x7.5
MDT ACC chassis
Deadair keymo brake (still waiting on stamp)
TriggerTech Diamond set to 1lb
Nightforce 5-25 with an ARC single piece mount.
 

Attachments

  • 6.5 front angle.jpg
    6.5 front angle.jpg
    517 KB · Views: 153
  • 6.5 side.jpg
    6.5 side.jpg
    271.1 KB · Views: 153
Last edited:
Well… You see… My local store had a 24” Christensen Arms Ridgeline in .280 Ackley Improved, and with the $350 rebate ending tomorrow (9/30/22), I couldn’t say no… 😏

I snatched a 20MOA EGW HD base off my custom .30-06 AI that I never shoot, and had this old Austrian/USA Zeiss Conquest 3-12x56 30mm FFP scope in a set of Seekins Precision low rings, just collecting dust, so, for now, this is how she’ll be. In the near future, I hope to put a new Kahles Helia 3.5-18x50i, or maybe something like a Razor or a nice hunting scope with exposed turrets (elevation at minimum).

A96A3D9B-6A02-4810-84C1-A8E0D5D4F7E9.jpeg
08DB5FD8-F6B7-4303-A200-A98E3940471C.jpeg
4FDBC447-2770-4485-AF9D-1FCEC506A379.jpeg
 
My Pierce 6.5x47L got put on a diet and I like it better now though another scope upgrade will likely occur.

Swapped the EH1 folder out for a new LRH and the Leupold for a P4xi 4-16.

06517813-2C63-48E8-B2C7-7E46EA584109.jpeg
 
Zero Compromise Optic ZC527 5-27x56 M3X NLE
Hawkins Precision Heavy Tactical 1" rings
Impact Precision 737R
Bartlein Carbon Fiber M24 chambered in 6.5 Creedmoor and threaded by Rubicon Precision
MBM self timing Brake
XLR Industries Element 4.0 Magnesium with Carbon Fiber stock and grip
MDT magazines
Atlas Cal Bipod
Total weight just under 12 pounds with the bipod and no magazine
-Richard@CST


View attachment 7858920
View attachment 7858924
View attachment 7858926


Changed my setup from the XLR Element 4.0 Magnesium to the Envy Pro JV, decided to go from the NRL Hunter Lightweight open setup to the NRL Hunter Heavyweight open setup with a XLR Envy Pro with C6. The balance of this setup is amazing - Richard

Weight
XLR Element 4.0 Magnesium 11 pounds 11 ounces with bipod
XLR Envy Pro w/o weights as seen below 14 pounds 1.5 ounces with bipod

IMG_3197.JPG
 
That is the whole Butt stock, this butt stock has a lot of adjustment. Now there is a sling adapter on the bottom of that button stock but that is it.
The sling adapter is what I was referring to, thanks!
 
Since you have a question mark I’ll assume you’re asking a question. Not sure I understand your angle brother.
Tiger on stock.
6gt = 6 gay tiger in many people's minds. More of a funny than anything.
There were a few threads making fun of it when it came out.
There were a few good memes as well.
Capture.PNG
 
Tiger on stock.
6gt = 6 gay tiger in many people's minds. More of a funny than anything.
There were a few threads making fun of it when it came out.
There were a few good memes as well.
View attachment 7971696
Never seen such sorcery. Thanks for clarifying.
 
  • Like
Reactions: LeftyJason
PXL_20221010_015808449.jpg
 

Attachments

  • PXL_20221010_015513363.jpg
    PXL_20221010_015513363.jpg
    326.1 KB · Views: 85
  • PXL_20221010_015230509.jpg
    PXL_20221010_015230509.jpg
    359.7 KB · Views: 85
  • PXL_20221010_015032158.jpg
    PXL_20221010_015032158.jpg
    415 KB · Views: 91
  • PXL_20221010_014916156.jpg
    PXL_20221010_014916156.jpg
    404.6 KB · Views: 95
  • PXL_20221010_014903218.jpg
    PXL_20221010_014903218.jpg
    372.8 KB · Views: 93
  • PXL_20221010_014854992.jpg
    PXL_20221010_014854992.jpg
    340.1 KB · Views: 82
  • PXL_20221008_175319900.jpg
    PXL_20221008_175319900.jpg
    672.3 KB · Views: 69
IMG_5059.jpg

IMG_5060.jpg

IMG_5063.jpg

700P
1/11 Kreiger 26"
All trued up and installed by Jon (before he got famous:ROFLMAO:)at Area 419 Firearms.
I actually did the bolt handle (Badger) myself. Took about 3 hours and 9 beers...
The Leupold patch was there before the Vortex....how about a patch Vortex?
YHM Phantom direct thread-also from Jon. The rifle is incredibly quiet. Anywho....the orange target is 1"X1" and fell when the third round took out the staple. So I held best I could on the bullet holes and kept rolling. Found the square when I walked back and placed it back up for reference. 100 yds. When that corn comes down I can go out to 4-500 yds. easily. Total round count is just over 1K. It shoots way better than this service rifle slut...🙄
I feel like a poor posting these pictures after looking at some of the rifles....holy guacamole!
Good luck and good shooting!
 
First post with this group, excited to be a member! (Longtime reader, never contributor till now)

Wanted to give a huge shout out to Owen @Front Range Precision for helping me with this build & my endless questions!
 

Attachments

  • 85836BD0-D8DA-4989-8C5B-51F254155D7E.jpeg
    85836BD0-D8DA-4989-8C5B-51F254155D7E.jpeg
    615.1 KB · Views: 158
  • 060DFCCF-98C5-4597-990E-155B1D366FE7.jpeg
    060DFCCF-98C5-4597-990E-155B1D366FE7.jpeg
    720 KB · Views: 167
  • FEAAB744-8F86-4807-B546-DD58A26E12AD.jpeg
    FEAAB744-8F86-4807-B546-DD58A26E12AD.jpeg
    823.4 KB · Views: 158
Remington 700PCR 6.5 Creedmoor Heavy 5R 24" barrel
Nikon Black FX1000 6-24X50 FFP
Nikon Black 1 pc mount
Timney Calvin Elite trigger
Precision Armament M11 HD brake
Vortex flip caps and Vortex level
Elcheapo Caldwell bipod till I decide what I really want on there.

279530047_495128928962503_956088265278422785_n.jpg
 
Remington 700 Short Action .223 - Bolt Fluted by smith
26" stainless modified M24 Contour Barrel - Fluted
McMillan A3 Stock, Adj LOP Spacer System, Adj Cheek - Moulded in Desert Camo
Trigger Tech Primary Trigger
Harris BRMS 6-9 Bipod
Nightforce 4-16x50 ATACR Mil-C reticle
Accuracy 1st Bubble Level (Tan)
Badger Bolt Knob
Badger 20 MOA Rail - 8x40 Screw Option
Badger EFR
Badger M5 Bottom metal
Badger M40A3 Scope Rings

20221015_085847.jpg
 
Last edited:
What Brand Nightvision bridge is this?
Not sure which it is as I bought that rifle used. I'll look it up on some paper work I have.

Just checked my paper work, it only mentions the efr not the brand.
 
Last edited:
  • Like
Reactions: Zigjib