Precision Rifles.....show em!!

[christopher.dow]

My 300 Norma barreled action arrived from Bugholes today:

Bartlein 28” heavy varmint 1:9 twist, Fat Bastard brake
Defiance Deviant Tactical action
Timney 510 trigger
MDT LSS Gen II
XLR Extreme butt stock & folder
Vortex Razor Gen II

I’m hoping to load some rounds tomorrow night so I can take it out Saturday. Greg sent me a fired casing so I can get the sizing right the first time.

 

[palle2612]

Oldie but gooddie. (It’s Sold, plans in for new build)
Howa 1500 .308 24” HB in B&C medalist Stock. (Sidewalls of front cut of, new texture added)
Roedale break
Falcon Optics 5.5 x 25 x 50
Eagle stockpac
Bipod
Duracote by myself. OD green, FDE
Everything else std.
Did it Well with 168gr Lapua Scenar to 600 meters

 

[Frankly]

Howa Bravo 6.5CM Vortex Razor II with $100 bills laminated within.

 

[palle2612]

Beauty. One of my plans for the future??

 

[LeftyJason]

Howa Bravo 6.5CM Vortex Razor II with $100 bills laminated within.

View attachment 6891135

What do you mean by $100 bills laminated within?

 

[Frankly]

What do you mean by $100 bills laminated within?

That I spent too much money on shooting!

 

[Fig]

It could be a lot worse. You could be into street rods!

 

[jwood1284]

 

[luv2hunt6]

My 3 favorite rifles.
GAP Templar 6.5 Creedmoor
GAP Tempest 6mm Creedmoor
GAP built Remmy 700 308

 

[Basher]

Nice! Forgive my ignorance, but what case is that? I need one for my AT. Thanks!

 

[jwood1284]

Nice! Forgive my ignorance, but what case is that? I need one for my AT. Thanks!

Pelican 1750

 

[PFG]

My 3 favorite rifles.
GAP Templar 6.5 Creedmoor
GAP Tempest 6mm Creedmoor
GAP built Remmy 700 308

WOW! Nice lineup. How do you like that Templar 6.5? Mind posting the build specs?

 

[PBWalsh]

@Basher Are you in Tuscaloosa, AL? I'd recognize that Taco Casa sticker anywhere!

 

[pmclaine]

Pic turned out terrible.

Surgeon Scalpel barreled action .308
Vortex Razor AMG
KRG Bravo
Vortex rings (until I swap for a Spuhr)

View attachment 6890086

Thats the photo filter they used on Diane Sawyer to make her look other than the dried up old hag she is on TV.

Surely that rifle is better looking than Diane Sawyer and can be shot filter free or did you just take your camera from the freezer into warm humid air?

 

[Basher]

@Basher Are you in Tuscaloosa, AL? I'd recognize that Taco Casa sticker anywhere!

No sir, but it appears that jwood1284 is.

 

[PBWalsh]

Ooops! @jwood1284 I like the Taco Casa sticker, enjoy their sanchos!

 

[luv2hunt6]

WOW! Nice lineup. How do you like that Templar 6.5? Mind posting the build specs?

With the exception of the caliber, action, twist rate, and front rail, it was built almost identical to my 6mm.

 

[PFG]

@luv2hunt6 Thanks! Good build.

 

[CBDR]

Accurate Ordnance build: Long wait, worth it. Stiller tac 30 in 6.5 cm. Brux 20", Manners carbon fiber, TT 3 x 15m. Half inch MOA easy. Total weight = nine lbs. Extremely handy in tight places.

 

[DXT_Shooter]

CZ 455 Precision Trainer .22lr
16.5” threaded factory barrel
Manners Stock is pillared and bedded
Sightron SIII 10-50x60
Area 419 15 MOA Rail
Vortex Precision 30mm Medium Rings

 

[PAYDIRT]

What's the BRCC sticker? There's one on my fridge in my "Tavern" and I can't remember what it's from.

 

[JFComfort]

Current rifles I’m running. 6.5 CM and 6.5 SAUM.

 

[SHP091]

I'll get this thread started again


26" Bartlein M24 .260Rem
Stiller TAC30
Murphy Precision 20MOA Scope Base
XLR Element Folding Chassis
Kampfeld Customs Brake
Jewel HVR 14oz
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 0.92" 34mm Rings
Barrel and Scope Base cerakoted Snipers Grey
Action is melonite from factory

Patriot Valley Arms
26" Bartlein M24 6.5x47L
Bighorn TL3
Receiver DLC / Bolt NP3
XLR Element Folding Chassis
Jewel HVR 14oz
Rugged Suppressors 3 Port QD Brake
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 1.26" 34mm Rings

just wondering what brand is the grip?

 

[jwood1284]

What's the BRCC sticker? There's one on my fridge in my "Tavern" and I can't remember what it's from.

lol Black Rifle Coffee Company

 

[PAYDIRT]

lol Black Rifle Coffee Company

Yup, guess I wasn't drinking coffee when I put it on. Now let's get back on track. Here's the budget 223 wearing a new suit.

 

[pmclaine]

Yup, guess I wasn't drinking coffee when I put it on. Now let's get back on track. Here's the budget 223 wearing a new suit. View attachment 6893625

Whos stock riser. Havent seen before........

 

[PAYDIRT]

Whos stock riser. Havent seen before........

https://www.amazon.com/gp/aw/d/B007...g_1?ie=UTF8&psc=1&refRID=GNJ1E0XWX78ZGMPS3AWT

 

[daves37120]

Accurate Ordnance 6.5 Creedmoor rifle - actual build time was about 3 three weeks. Purchase vendors are shown in parenthesis. Pics aren't great but wanted to share as this rifle is a tack driver. Best group is .26 MOA at 1200 yards!

The rifle specs are the following (including optic):
Manners T4- in midnight camo (purchased used from this site)
Defiance Deviant action (purchased from Core Shooting Solutions)
Brux barrel, 1-8 twist, M24 profile finished at 26 inches (bugholes.com)
Cerakote barrel and action midnight black (Accurate Ordnance)
Area 419 Hellfire break (supplied by Accurate Ordnance)
Trigger Tech Diamond trigger (supplied by Accurate Ordnance)
Harris Bipod (from another rifle)
Nightforce 7-35 with Tremor 3 reticle (purchased from a friend) sitting in a Spuhr mount (Mile High Shooting)

 

[DXT_Shooter]

Accurate Ordnance 6.5 Creedmoor rifle - actual build time was about 3 three weeks. Purchase vendors are shown in parenthesis. Pics aren't great but wanted to share as this rifle is a tack driver. Best group is .26 MOA at 1200 yards!

The rifle specs are the following (including optic):
Manners T4- in midnight camo (purchased used from this site)
Defiance Deviant action (purchased from Core Shooting Solutions)
Brux barrel, 1-8 twist, M24 profile finished at 26 inches (bugholes.com)
Cerakote barrel and action midnight black (Accurate Ordnance)
Area 419 Hellfire break (supplied by Accurate Ordnance)
Trigger Tech Diamond trigger (supplied by Accurate Ordnance)
Harris Bipod (from another rifle)
Nightforce 7-35 with Tremor 3 reticle (purchased from a friend) sitting in a Spuhr mount (Mile High Shooting)

Dang I would like to do .26 at 100 let alone at 1200 ?... very nice rifle ?

 

[JumpJim]

First outing for my first custom build...

Accurised Rem 700 by Spartan Precison Rifles
McMillan Carbon A5 Ambush
Proof research 24” Sendero
Spartan custom bottom metal
Spartan Kopis muzzle brake
Bix n Andy Marksman trigger
Swarovski Z8i scope
Tier One Unimounts
Spartan Javelin Carbon bipod (by me!)
Chambered in 6.5 Creedmoor

Absolute tack driver.... beyond pleased ?

 

[Dthomas3523]

Less shitty pic of the Scalpel .308

 

[Camocal]

Short action customs 308

 

[CBDR]

That folks is straight up classy

 

[beaverpelt]

RW Snyder built .308

 

[Dthomas3523]

Short action customs 308View attachment 6894402

......your scope fell off somewhere.

 

[fatmat27]

My first foray into bolt-action. Been meaning to for a while then I found a great deal on this along with the $100 Remington rebate. Scope was cannibalized from another rifle for the time-being.

Remmington 700 SA .308
5R 1:10 22" barrel
Schmidt & Bender 3-20X50 H2CMR
Magpul stock
Surefire Brake
Badger rings/mount
Timney Calvin Elite 2-stage
Harris bipod

 

[Bcamos]

Certainly not a precision rifle or anything to really write home about. It's my first venture into bolt guns besides hunting rifles.

Mostly factory Remington 700 Tactical in .308
KRG Bravo
Harris BRMS
Weaver 0MOA rail
Warne QD rings
Burris Fullfield E1 4.5-14

My best group so far has been .19 MOA but it consistently shoots at or around .5 MOA with 168gr Federal Gold Metal Match.
I'd like to upgrade the optic, but having 3 kids tends to put the squash on that kind of stuff haha.

 

[stereo.pete]

Certainly not a precision rifle or anything to really write home about. It's my first venture into bolt guns besides hunting rifles.

Mostly factory Remington 700 Tactical in .308
KRG Bravo
Harris BRMS
Weaver 0MOA rail
Warne QD rings
Burris Fullfield E1 4.5-14

My best group so far has been .19 MOA but it consistently shoots at or around .5 MOA with 168gr Federal Gold Metal Match.
I'd like to upgrade the optic, but having 3 kids tends to put the squash on that kind of stuff haha.


View attachment 6895113
View attachment 6895114

@Bcamos I'd say that's a pretty precise rifle

 

[pmclaine]

https://www.amazon.com/gp/aw/d/B007...g_1?ie=UTF8&psc=1&refRID=GNJ1E0XWX78ZGMPS3AWT

Thank you!

 

[Bcamos]

@Bcamos I'd say that's a pretty precise rifle

Thank you! I'd like to get my shooting to where it's more consistent with those smaller groups.

 

[DXT_Shooter]

Certainly not a precision rifle or anything to really write home about. It's my first venture into bolt guns besides hunting rifles.

Mostly factory Remington 700 Tactical in .308
KRG Bravo
Harris BRMS
Weaver 0MOA rail
Warne QD rings
Burris Fullfield E1 4.5-14

My best group so far has been .19 MOA but it consistently shoots at or around .5 MOA with 168gr Federal Gold Metal Match.
I'd like to upgrade the optic, but having 3 kids tends to put the squash on that kind of stuff haha.


View attachment 6895113
View attachment 6895114

I have a Bravo Chassis just need the Tikka CTR to put in it...great shooting and looks awesome in the Bravo ??

 

[Bcamos]

I have a Bravo Chassis just need the Tikka CTR to put in it...great shooting and looks awesome in the Bravo ??

My buddy just bought a Tikka CTR in .308. Right out of the box it was shooting .38" groups. I've been trying to talk him into the Bravo as well. The CTR is an awesome rifle.

 

[DXT_Shooter]

My buddy just bought a Tikka CTR in .308. Right out of the box it was shooting .38" groups. I've been trying to talk him into the Bravo as well. The CTR is an awesome rifle.

When I get it all together I will post some pictures.

 

[hkownz]

Started Life as a Remington 700 Long Range, 300 win mag 26"
Accuracy international AICS AT 2.0 with thumbhole stock sides.
Atlas AI mounting Spigot
Atlas BT10NC Bipod
Vortex Razor HD Gen 1 5-20x50
Nightforce 20 Moa extreme duty steel base
Vortex 35mm precision matched rings
Jewell Trigger
Thunderbeast Arms Co. 30CB muzzle break
Magpul MS4 Dual QD sling

 

[viking78]

Howa Bravo 6.5CM Vortex Razor II with $100 bills laminated within.

View attachment 6891135

What have you added to the pistol grip area?

 

[viking78]

Do you count these in?
2XTikka CTR.

 

[Frankly]

What have you added to the pistol grip area?

Just one of those Sorbothane palm swells that Brownells sells. XXL hands.

 

[viking78]

Just one of those Sorbothane palm swells that Brownells sells. XXL hands.

Do you need to glued it on, or does it come with the twinXsticker

 

[Frankly]

Do you need to glued it on, or does it come with the twinXsticker

It’s a sticker type, so far it holds well with a few small gaps over curves that press down once you grip. Come Summer heat we’ll see, it will either weld itself on or fall off from sweat.

I may just go without or try griptape, I can even stiple it like a Glock.

 

[Andeddu]

Remington 700 LA receiver.
26” Bartlein 1:10 barrel chambered in 300wm
Mdt tac21 chassis.
MDT skeleton stock
Timney 2 stage trigger
PTG bolt mini m16 extractor
Kahntrol hexmod muzzle brake
Atlas 5h bipod
Nightforce 20moa ultralight rail
Nightforce 7-35 FFP atacr
Venom defense grip.
Gunsmith work by Randall at AR15BARRELS
This is my first bolt gun I pieced together and had built. Trying to get into long range shooting. Going to try it out for the first time within a week or two.