Never had an issue shooting Eley Match and Edge in my Vudoo. Shot thousands of them in matches. The problem most have is rim lock as the bullet shape sits different in the mag.
Proof prefit - 20”. Threaded but no tuner.Barrel info for your RimX? Make? Length? Threaded? Tuner? Etc.
Thanks
Congrats?Never had an issue shooting Eley Match and Edge in my Vudoo. Shot thousands of them in matches. The problem most have is rim lock as the bullet shape sits different in the mag.
Congrats?
I fought feeding issues with my Vudoo in most stocks and chassis. Switched to a Foundation with Vudoo bottom metal and can’t make it misfeed.Tough to answer. i have a vudoo i shoot in prs and it out shoots me[when i don't have feeding issues] that is the only real problem i have with it. RIM LOCK. The rim xdoes not have this issue do to the way the mag is fed [angled].i also have a MPA chassis for the vudoo and the only mags that I can get to feedcorrectly are the zero sucks, But i shot 1 match and had ftf on all 10 stages and several with 2 ftf. got real good and clearing them[still placed 5]
Now if I have to do over with what i know now RIMX! Stan
That’s seriously shoddy looking. How could that pass any QC check?I know this thread is a few months old but for information purposes, this is my 2nd barrel from ibi. I had to send the first back because of loose chamber. You could drop a round in and shake it and it was really loose. This one.. well I think you can tell by the pics.View attachment 8261820View attachment 8261821
I haven’t heard great things about their prefits with the barrel nut, I’ve heard of a number going back because of thin spots getting banged up around the chamber mouth or just messy chambers.I know this thread is a few months old but for information purposes, this is my 2nd barrel from ibi. I had to send the first back because of loose chamber. You could drop a round in and shake it and it was really loose. This one.. well I think you can tell by the pics.View attachment 8261820View attachment 8261821
This one won't even feed.I haven’t heard great things about their prefits with the barrel nut, I’ve heard of a number going back because of thin spots getting banged up around the chamber mouth or just messy chambers.
I couldn’t like this post anymore!The mad scientist @karagias at ARC needs to design a rimfire action.
seven axis dremel magik going on thereI know this thread is a few months old but for information purposes, this is my 2nd barrel from ibi. I had to send the first back because of loose chamber. You could drop a round in and shake it and it was really loose. This one.. well I think you can tell by the pics.View attachment 8261820View attachment 8261821