Re: Running out of windage
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fuzzytail</div><div class="ubbcode-body">15 clicks and I run out of windage. Scope was centered before mounting and rifle had leupold vx3 on before and leupold rings and mounts. Everything was fine with that set up.
</div></div>
I would be willing to bet that it is most likely your scope then. 15 "clicks" on most Mk4 models equates to only around 4MOA (again...on most models) so that's not going to work!
Can you grab the VX3 you had on it previously an mount it in your current setup and see if the problem resolves. If it does, then you know it is your current Mk4 that is bad. If you have the same problem with the VX3, then the problem is within the rings/base somewhere.
If it IS the scope, at least the Mk4 has a lifetime warranty. Send it back to Leupold and tell them what the problems you are having, what you have done to ensure it is not anything else in your setup, and that you want it repaired or a new one per the warranty.