Rifle was built by myself a little less than a year ago, and has shot well.
Rifle averages 2815 FPS with Mk262 Mod1, and averages from the low .6’s to the mid .7’s for 5X5, with plenty of anomaly groups in the .2’s and .3’s
Optic/Sling/Indicator not included. Round count is ~700, all Mk262 Mod 1
Parts are as follows
UPPER ASSY
-VLTOR POLYLITHIC Keymod 15” with forward assist (trued face)
-Satern NM 20” Stainless with 5/8-24 adapter
- JP clamping adjustable .750” gas block, rifle length gas.
-Surefire MB762SS with the skirt removed
-JP FMOS carrier
-LWRC NiB bolt
-VLTOR Charging Handle
- Harris BRMS with podlock on an adapter with spike feet.
*Upper has been milled (professionally) for clearance to fit a 50mm objective in 1” high rings, milling is covered with a ladder rail section.*
LOWER ASSY
Reciever: Billet Ambi UM Tactical
Trigger: Geissele NM (Gold spring)
Folding Mech: LAW Tact.
Stock: Ruger RPR
Buffer/Spring: HK Tungsten equivalent/HK416 action spring
(Set up to run Mk262)
Small Parts: Colt
Barrel, both receivers & stock cost more than the asking price...
$1,000.00 to your FFL only
PayPal (you cover fees) certified check or MO
PM for questions
Rifle averages 2815 FPS with Mk262 Mod1, and averages from the low .6’s to the mid .7’s for 5X5, with plenty of anomaly groups in the .2’s and .3’s
Optic/Sling/Indicator not included. Round count is ~700, all Mk262 Mod 1
Parts are as follows
UPPER ASSY
-VLTOR POLYLITHIC Keymod 15” with forward assist (trued face)
-Satern NM 20” Stainless with 5/8-24 adapter
- JP clamping adjustable .750” gas block, rifle length gas.
-Surefire MB762SS with the skirt removed
-JP FMOS carrier
-LWRC NiB bolt
-VLTOR Charging Handle
- Harris BRMS with podlock on an adapter with spike feet.
*Upper has been milled (professionally) for clearance to fit a 50mm objective in 1” high rings, milling is covered with a ladder rail section.*
LOWER ASSY
Reciever: Billet Ambi UM Tactical
Trigger: Geissele NM (Gold spring)
Folding Mech: LAW Tact.
Stock: Ruger RPR
Buffer/Spring: HK Tungsten equivalent/HK416 action spring
(Set up to run Mk262)
Small Parts: Colt
Barrel, both receivers & stock cost more than the asking price...
$1,000.00 to your FFL only
PayPal (you cover fees) certified check or MO
PM for questions
Attachments
Last edited: