• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Starting Load suggestions .338LM

powerspc

It Sounded Like a Good Idea at the Time
Supporter
Full Member
Minuteman
  • Mar 15, 2018
    1,190
    4,797
    Any load data or suggested starting loads for:
    .338 Lapua Magnum

    Federal 215 Primer
    Hodgdon H4350
    Hornady 33361 Match 250 GR
    Hornady 8684 Unprimed Case (new brass)
    C.O.L. 3.625”
    Cadex 27” barrel / 1-9.5” Twist

    Hodgdon says 74gr start – 78gr max
    Hornady doesn’t list H4350 (9th edition)
     
    Any load data or suggested starting loads for:
    .338 Lapua Magnum

    Federal 215 Primer
    Hodgdon H4350
    Hornady 33361 Match 250 GR
    Hornady 8684 Unprimed Case (new brass)
    C.O.L. 3.625”
    Cadex 27” barrel / 1-9.5” Twist

    Hodgdon says 74gr start – 78gr max
    Hornady doesn’t list H4350 (9th edition)
    hornady 285 gr ELDM, RETUMBO powder , CCI lrm no. 250 primer
     
    HORNADY 285 eld-m, RETUMBO powder, CCI lrm #250 primer. Hornady 10 edition manuel . load and shoot

    I wrote that down for later; but what if you had to use what is posted above. What would your starting load be?
     
    I wouldn't mess with 4350 for a lapua, h1000 is probably the fastest burning powder i would go with.
     
    What bullet are you trying to use 4350 with? 92 gr of retumbo with 300 gr bullets or 89 grains of h1000 is always my go to.
     
    Hornady 250gr BTHP
     
    I wouldn't mess with 4350 for a lapua, h1000 is probably the fastest burning powder i would go with.

    Okay the 4350 is out; I can go with H1000 but do you have any thoughts on H4831?