• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Suppressors tbac cleaning

When the suppressor has gained approx 2-3 ounces, it's time to clean
This can be accomplished using CLR (a ZEP product - find at Home Depot) to dissolve the carbon. Soak the inside of the suppressor in ZEP CLR and flush it every day for several days. Alternating with an Ultrasonic cleaner can help to break up stubborn carbon. Do not use CLR in an ultrasonic cleaner - it will damage the tank.
...

For ULTRA series suppressors, CLR should not soak the "Direct Thread Insert" for Direct Thread ULTRA suppressors. The best way to accomplish this is to have the thread end up and fill the suppressor up to just short of the direct thread insert, or about 1.25" into the suppressor.
 
  • Like
Reactions: 1fliride
Zak, are there any special cleaning considerations for a 30P-1 that's been re-cored to a direct thread Ultra 9? Is the "blast shield" in the first few inches of the can sensitive to any chemicals that the Ti portions might not be?

Thanks.
 
  • Like
Reactions: 1fliride