And one more just because.
![38909159924_955dcd38dd_b.jpg"](https://farm5.staticflickr.com/4751/38909159924_955dcd38dd_b.jpg")
And one more just because.
Details?
Ares Armor 80% 7075 billet lower, Geissele SSA, Magpul CTR milspec, BAD ambi selector, BCM stripped upper, BCM 13″ KMR, Noveske Infidel 13.7″ barrel, B.E. Meyers 249F, Aimpoint T1 2 MOA, ADM T1 mount
The Noveske barrel with the 249F makes it a legal 16.1" when pinned and welded and comes in right at 7 pounds. Rattlecan job was done in the garage with a different upper.
Last edited:
This is my "Mule" anytime I test parts, I end up doing it on this one. weather it's a trigger, or BCG etc... this rifle has had a ton of parts through it. I don't have a current pic. I shot it out to 350 yards with a scope and bipod, but that was a long time ago.
Right now it has the Luth AR stock, and a 4x32 ACOG (green chevron) with RMR.
-Mega lower
-BCM upper
-no clue on rail
-223 wylde 1/8 16'' barrel
-Trigger Tech flat 3.5# trigger.
Right now it has the Luth AR stock, and a 4x32 ACOG (green chevron) with RMR.
-Mega lower
-BCM upper
-no clue on rail
-223 wylde 1/8 16'' barrel
-Trigger Tech flat 3.5# trigger.
Lightweight 10.5'' 223 build. Pistol 5 pounds 4 ounces in picture, about 2.5 ounces of stuff missing on it.
-Rebel lower
-Bootleg upper
-SLR 9.5'' Rail
-Radian charging handle and safety
-Trigger Tech 3.5# curved trigger
-Battle Arms titanium pins
Gas block is on the way- Battle Arms titanium. It weighs about .6oz
Muzzle device also on the way- Q Cherry bomb. weighs about 2 oz.
Total weight on this will be under 5.5 pounds with MRO on SLR mount. Cant wait to shoot it!
Edit to add finished pic. Gas block and cherry bomb landed the other day. I am very happy with this thing.
-Rebel lower
-Bootleg upper
-SLR 9.5'' Rail
-Radian charging handle and safety
-Trigger Tech 3.5# curved trigger
-Battle Arms titanium pins
Gas block is on the way- Battle Arms titanium. It weighs about .6oz
Muzzle device also on the way- Q Cherry bomb. weighs about 2 oz.
Total weight on this will be under 5.5 pounds with MRO on SLR mount. Cant wait to shoot it!
Edit to add finished pic. Gas block and cherry bomb landed the other day. I am very happy with this thing.
Last edited:
A new 5.56mm hard use rig destined for pig hunting from a helicopter. SanTan STT-15 billet receiver set; Noveske HFCL 14.5" barrel with mid-length gas; Geissele Mk 8 rail; Surefire WarComp, pinned and welded; MSTN Ionbond DLC coated BCG with fitted bolt; BCM Gunfighter ambi CH; LaRue MBT trigger; Magpul furniture; V Seven small parts.
Last edited:
MSTN 5.5 LB lightweight precision rig with Proof Research 14.5" CFW barrel & fitted bolt, STT-15L billet receiver set, BCM KMR rail, MSTN N/M Ionbond DLC coated BCG, PRI Gas Buster, Geissele SD-3G trigger, pinned and welded Surefire MB556, VZ G10 panels, and lots of V Seven small parts in titanium. The scope is the Kahles K16i, in a Spuhr SP-3026 mount.
An 18" fluted Bartlein with .223 Wylde chamber by Craddock Precision, left bead blasted, forms the centerpiece of this rifle. I've never seen finer work, myself! BAD 556-LW receiver set and 13" rail, all done in tungsten Cerakote by Shapeshifter Finishing. The usual MSTN N/M bolt carrier group, with fitted bolt at minimum chamber specs, all done in Ionbond DLC down to the gas rings. Can't go wrong with a PRI Gas Buster! This rifle has just about every part V Seven offers in Titanium, some you can see, and some you cannot. Vltor A5 recoil system and SF MB556 finish out either end.
Last edited:
Aero 16”w/ 15” Fortis rev/USO mr-10
I like the Accutac br4 better then my Atlas bt10 I have on my bolt gun. Definitely will be picking up 2 more
Aero 14” w/9” Fortis rev II/switchblock/USO sn4 1.5-6 jng mil
Colt 10.5” w/7” Fortis rev II/switchblock I think I want another USO in 1-4 for it
Colt a1/Brownells lower 10.5”
I run 2 Crux cans .30 Archangel & Axe9
I like the Accutac br4 better then my Atlas bt10 I have on my bolt gun. Definitely will be picking up 2 more
Aero 14” w/9” Fortis rev II/switchblock/USO sn4 1.5-6 jng mil
Colt 10.5” w/7” Fortis rev II/switchblock I think I want another USO in 1-4 for it
Colt a1/Brownells lower 10.5”
I run 2 Crux cans .30 Archangel & Axe9
Last edited:
Yeah, it stopped production once the 1-6 was introduced and was removed altogether a while ago.
They actually have a trade in 1-4 in the sample list for 500 I believe.
They have a trade in 1-6 there too. The reticle in the 1-6 is different.
Last edited:
I used to have one of the early 1-4s and it was a great little optic (relatively speaking). I haven't looked at the 1-6 but SWFA makes good glass.
I drive by there everyday when I take my kids to school.
My 3-gun rifle is mostly Aero Precision parts with Wylde 16” mid-length gas, Vortex Strike Eagle 1-6, Velocity flat single stage trigger, JP captured spring, Magpul plastic, flash hider rather than comp. Simple and reliable, not too heavy, expensive or fussy. I’ve had fancier ARs with lighter parts, adjustable gas, etc. but this is the one to keep.
No issues with Aero’s quality control, had several and all quite good FWIW.
Last edited:
Hey, long time looker on the site. I just now joined. Here is my latest build:
BCM stripped upper
Ballistic Advantage 18” SPR barrel 5.56
PSA Nickel Boron BCG
S&W lower
Timney 3lb trigger
KNS Pins
BCM H Buffer inside Magpul fixed Carbine
Leupold Rings/ Magpul BUIS
Nikon Buckmasters 6-18 Mil-Dot
It likes BH 77gr Tmk.
3/4” groups at 100yfs
BCM stripped upper
Ballistic Advantage 18” SPR barrel 5.56
PSA Nickel Boron BCG
S&W lower
Timney 3lb trigger
KNS Pins
BCM H Buffer inside Magpul fixed Carbine
Leupold Rings/ Magpul BUIS
Nikon Buckmasters 6-18 Mil-Dot
It likes BH 77gr Tmk.
3/4” groups at 100yfs
Attachments
How do you like the stock?
For years I have been convincing myself that my bolt guns got the job done and I really didn't need an AR, but the past few months the urge has gotten to be too much. So, after looking at factory offerings, I decided to build one myself and finally got all the parts together. Nothing fancy, just a basic rifle.
Aero Precision Stripped lower
Seekins LPK and adj. low profile gas block
DS Arms 6 position buffer tube
DPMS buffer/spring
BCM upper assembly, charging handle and pistol grip
Stag Arms BCG
Brownells B-TAC 16" 1 in 7" socom profile barrel
Magpul MOE stock
Troy 13" Alpha Rail Handguard
Aero Precision Stripped lower
Seekins LPK and adj. low profile gas block
DS Arms 6 position buffer tube
DPMS buffer/spring
BCM upper assembly, charging handle and pistol grip
Stag Arms BCG
Brownells B-TAC 16" 1 in 7" socom profile barrel
Magpul MOE stock
Troy 13" Alpha Rail Handguard
It's the HKParts stock and has been 100%. I was concerned about cycling issues but the Noveske system is eating everything and no FTF or FTE so far.
Shes changed since i took the top picture this but per the lower picture
aero precison upper and lower
rise armament 3.5 flat blade
vortex crossfire II in burris PEPR mount
midwest industries 15" rail
criterion h-bar 223 wylde 20"
harris bipod
raptor charging handle
magpul backup sights
rpr takeoff stock
the 22lr upper is same lower upper scope and rail
with jp enterprises bolt and barrel
bettermag adapter for use of 15-22 mags
aero precison upper and lower
rise armament 3.5 flat blade
vortex crossfire II in burris PEPR mount
midwest industries 15" rail
criterion h-bar 223 wylde 20"
harris bipod
raptor charging handle
magpul backup sights
rpr takeoff stock
the 22lr upper is same lower upper scope and rail
with jp enterprises bolt and barrel
bettermag adapter for use of 15-22 mags
Last edited:
Chrome lined or nitride? Hows it shooting for ya & what loads does it like? The RPR stock is bitchin man, nice setup. Also, 1/2x28 threads?
Chrome lined 1/2x28. It shoots like a dream anything from 52grs up to 77grs. I don't get to punch paper as much as id like so i cant say what it prefers but i've taken a liking to 75 hpbt over imr 4064 around 2875fps. That really seems to fight the wind up here and coyotes dont like it. The stock is nice but i think i may swap out a magpul prs for looks.
Similar threads
