I had my ar10T barrel threaded and I have shot it without installing a flashider yet, does anyone think that the accuracy would be effected by not installing a FH? It doesn't shoot nearly as well after the threads, the crown looks great, same loads. I can't seem to pin down the accuracy problem yet, just wondering if this has ever happened to anyone else. Thanks for any help!!!
Re: threaded barrel accuracy
Your loss in accuracy may be caused by the process of threading the barrel, and not by the thread itself. Did you send it to a competent smith to have it done?
I can't imagine that a threaded end would affect your accuracy all that much so long as your crown remained intact. Try installing a FH or brake anyway, and see what happens.
Your loss in accuracy may be caused by the process of threading the barrel, and not by the thread itself. Did you send it to a competent smith to have it done?
I can't imagine that a threaded end would affect your accuracy all that much so long as your crown remained intact. Try installing a FH or brake anyway, and see what happens.
Re: threaded barrel accuracy
De-tuned for your load by changing the barrel harmonics, maybe? I'd say wait until you get the FH, and assuming you reload, try working up a new load to try and find a new sweet spot.
I admittedly don't know jack about semi's, so others may have better advice.
De-tuned for your load by changing the barrel harmonics, maybe? I'd say wait until you get the FH, and assuming you reload, try working up a new load to try and find a new sweet spot.
I admittedly don't know jack about semi's, so others may have better advice.
Re: threaded barrel accuracy
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mattj</div><div class="ubbcode-body"><span style="font-weight: bold">De-tuned for your load by changing the barrel harmonics, maybe?</span> I'd say wait until you get the FH, and assuming you reload, try working up a new load to try and find a new sweet spot.
I admittedly don't know jack about semi's, so others may have better advice.
</div></div>
I think that will probably be it, the harmonics of the barrel are changed due to the modification of the barrel.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mattj</div><div class="ubbcode-body"><span style="font-weight: bold">De-tuned for your load by changing the barrel harmonics, maybe?</span> I'd say wait until you get the FH, and assuming you reload, try working up a new load to try and find a new sweet spot.
I admittedly don't know jack about semi's, so others may have better advice.
</div></div>
I think that will probably be it, the harmonics of the barrel are changed due to the modification of the barrel.
Re: threaded barrel accuracy
thanks for the replies, looks like I will try a flashhider, then try a different load, I do reload. The smith is a reputable smith, so I am confident of his work, the groups at times make two different holes, about 2" apart at 9 and 3 oclock, 5 shots, they switch back and forth, I may also have a scope issue, I put a new scope on it the same time I threaded it, mounts are tight. Thanks guys!
thanks for the replies, looks like I will try a flashhider, then try a different load, I do reload. The smith is a reputable smith, so I am confident of his work, the groups at times make two different holes, about 2" apart at 9 and 3 oclock, 5 shots, they switch back and forth, I may also have a scope issue, I put a new scope on it the same time I threaded it, mounts are tight. Thanks guys!
