• Get 25% Off Access To Frank's Online Training

    Use code FRIDAY25 and SATURDAY25 to get 25% off access to Frank’s online training. Want a better deal? Subscribe to get 50% off.

    Get Access Subscribe

Ukraine war Bullshit.

You assume that the B2 flyover was intended to influence Putin - maybe it was to influence US citizens, maybe influence EU
I know a way to influence and fuck to the EU, pull all our funding to NATO, pull all our money, bases, and military equipment from Europe. Nothing but a bunch of deadbeats living and getting protected by the US taxpayer.
Let Europe take care of itself like adults should.
 
Please don't mix them. Also, r407 needs POE oil.

thats why I asked him about vaccin out the system and oil type, he is supposed to be an AC guy and gave shit advice.

Yet, I’m supposed to listen to his opinions on foreign policy and politics

Lol.

And just so you don't have to use the energy to click the link. Here's a screenshot.

Screenshot_20250816-213240.png


I've been doing it for years as well as many many other HVAC techs have.

I don't know who the dumbass newb is but he obviously doesn't know what the fuck he's talking about.
Here's a 100%fact. It's a replacement. It is safe to use with the oil in an R-22 system. Wanna know how I can prove it? There's absolutely no possible way to remove all the oil from a system. The oil migrates throughout the entire system. To remove all the oil you would have to replace the evaporator coil, the condensing coil, the compressor, the accumulator and then flush the line set. If it's a heat pump there's still going to be residual oil in the tubing for the reversing valve and the valve itself. At that point you could have bought two 410A systems so why would they make a "replacement" refrigerant that's not compatible?
You didn't want to believe someone that has owned and operated an HVAC company since 93 but because it tickled your itch to take a jab at me you didn't even put a few digits in a search bar and click it. Try 407-C and then click search. Six little taps on a keyboard would have proved what I said.
I guess that's why you believe what the "spooks" said about this incident (when they have been proven liars). It tickles your Russia bad fantasy.
Go back to posting naked selfies. The adults are discussing topics with an open mind.




PS. I could have easily posted the link and told both of you to fuck off.

But I didn't.
 
As you can see theatre of the absurd is still strong but on Monday it will be clear as decision will have to be made either foldem or all in. After all in (i just dont believe in rationale and logical thinking in the west anymore - i would be very pleasantly astonished baffled even if Trump would dump the EU lot) its just a question of when the escalatory path leads to a flying nuke. If any of you follow economic indicators of Europe they are horrendous and this whole thing is coming apart at its seams unless they manage to mobilize population into war against Russia EU falls apart in five years (if not earlier) and fuckers are willing to go nuclear as somehow they think they can survive. Or they are devil itself just focused on destruction i don’t know.
 
As you can see theatre of the absurd is still strong but on Monday it will be clear as decision will have to be made either foldem or all in. After all in (i just dont believe in rationale and logical thinking in the west anymore - i would be very pleasantly astonished baffled even if Trump would dump the EU lot) its just a question of when the escalatory path leads to a flying nuke. If any of you follow economic indicators of Europe they are horrendous and this whole thing is coming apart at its seams unless they manage to mobilize population into war against Russia EU falls apart in five years (if not earlier) and fuckers are willing to go nuclear as somehow they think they can survive. Or they are devil itself just focused on destruction i don’t know.

Z is an arrogant little shit and my theory is that he's been working behind the scenes with the neocons in the Congress of the USA and the EU. The money laundry business is good no matter how many young men die on a battle field to keep it operational.
 

And just so you don't have to use the energy to click the link. Here's a screenshot.

View attachment 8748830

I've been doing it for years as well as many many other HVAC techs have.

I don't know who the dumbass newb is but he obviously doesn't know what the fuck he's talking about.
Here's a 100%fact. It's a replacement. It is safe to use with the oil in an R-22 system. Wanna know how I can prove it? There's absolutely no possible way to remove all the oil from a system. The oil migrates throughout the entire system. To remove all the oil you would have to replace the evaporator coil, the condensing coil, the compressor, the accumulator and then flush the line set. If it's a heat pump there's still going to be residual oil in the tubing for the reversing valve and the valve itself. At that point you could have bought two 410A systems so why would they make a "replacement" refrigerant that's not compatible?
You didn't want to believe someone that has owned and operated an HVAC company since 93 but because it tickled your itch to take a jab at me you didn't even put a few digits in a search bar and click it. Try 407-C and then click search. Six little taps on a keyboard would have proved what I said.
I guess that's why you believe what the "spooks" said about this incident (when they have been proven liars). It tickles your Russia bad fantasy.
Go back to posting naked selfies. The adults are discussing topics with an open mind.




PS. I could have easily posted the link and told both of you to fuck off.

But I didn't.
I feel as if this is the wrong thread, so if admin wants, they could move all these posts to a new thread.

Yes, I'm a newb compared to you, but I do have some experience. 18 years of commercial and currently in charge of 3 techs, with several other locations that I provide tech support for. Had a customer lose a Dunham Bush this week so we had to switch from R12 to R407a.

When I said not to mix, I meant not to mix the freons. The R22 should be fully removed before switching to R407.

Mineral oil will still lubricate with 407. However, it does not blend with the 407 so it does not travel through the system properly to return to the compressor where it belongs.
Obviously its best to remove the bulk of the mineral oil, but unles your compressor has an oil drain, its not cost effective. Adding POE oil on top of the mineral oil helps to carry the mineral oil. Its a compromise, but does work.

POE oil is high in detergent function, so it will clean out the system. Be prepared for a plugged filter. We usually change them a week later; but I've seen a nasty system plug in 2 days.

If someone wants more help they can move this to its own thread, or message me directly and I'll be glad to help.
 
I feel as if this is the wrong thread, so if admin wants, they could move all these posts to a new thread.

Yes, I'm a newb compared to you, but I do have some experience. 18 years of commercial and currently in charge of 3 techs, with several other locations that I provide tech support for. Had a customer lose a Dunham Bush this week so we had to switch from R12 to R407a.

When I said not to mix, I meant not to mix the freons. The R22 should be fully removed before switching to R407.

Mineral oil will still lubricate with 407. However, it does not blend with the 407 so it does not travel through the system properly to return to the compressor where it belongs.
Obviously its best to remove the bulk of the mineral oil, but unles your compressor has an oil drain, its not cost effective. Adding POE oil on top of the mineral oil helps to carry the mineral oil. Its a compromise, but does work.

POE oil is high in detergent function, so it will clean out the system. Be prepared for a plugged filter. We usually change them a week later; but I've seen a nasty system plug in 2 days.

If someone wants more help they can move this to its own thread, or message me directly and I'll be glad to help.
Good grief. SMDH. You sound book smart but practical application is failing you.
How's that insurance commercial go? I've seen a lot of things so I know a lot of things.
Your little tidbits of cost effective and clogged filters says a lot. How's that poe oil working out in the older recip compressors? Which recips were rated or tested with it?
Will the oil still migrate if you add 407c with R-22? Yes it will. Do I need to post a pressure temp chart to show the difference between r-22 and R-407c?

PS: I have R-22 systems that I replaced a major component in which required the removal of all the refrigerant and recharged with 407c and many years later they are running just fine. Oil migration is not an issue. As noted previously... It Is A Replacement For R-22

PSS: a 454 system will operate just fine with all 410A in it. Factory says that they will not cover warranty if it's done. How are they going to know? 454 is a blend with 410 in it.
Factory says a lot of things to cover their ass.


PSSS: no need for another thread. I'm done.