Gunsmithing What size Torx for GAP action screws?

[johnsopa]

I need to get a Torx wrench for my GAP Crusader. Anyone know what Torx size they use for the two action screws?

I'm guessing T30 but I can't verify this.

Thanks!

 

[rideHPD]

Re: What size Torx for GAP action screws?

Get a Borka torque wrench kit, Triad Tactical has them. The B?-5 will have all you need, and you'll be able to properly mount rings, reassemble your action and everything. It's a hundred something but it's worth every penny to properly maintain your rifle and ensure repeatable accuracy.

 

[Cigarcop]

Re: What size Torx for GAP action screws?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: johnsopa</div><div class="ubbcode-body">

I'm guessing T30 but I can't verify this.

Thanks! </div></div>

Your guess is correct

 

[johnsopa]

Re: What size Torx for GAP action screws?

Thanks Cigarcop!

 

[2156SMK]

Re: What size Torx for GAP action screws?

If it's a badger bottom metal, those screws use a TORX PLUS.
A TORX will work, but is not correct...

 

[hyena74]

Re: What size Torx for GAP action screws?

whats with all the torx head screws on actions and scope rings and whatnot? i always liked the simplicity of a hex head and they are a hell of a lot easier to find in emergency situations.

 

[turbo54]

Re: What size Torx for GAP action screws?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: hyena74</div><div class="ubbcode-body">whats with all the torx head screws on actions and scope rings and whatnot? i always liked the simplicity of a hex head and they are a hell of a lot easier to find in emergency situations. </div></div>

Torx is far superior from a tool engagement standpoint. Hex socket head screws strip out way, way, way easier. Hex heads are out of the question in guns generally because they are bulky, and require quite a bit of radial clearance to get sockets on them. Phillips and flat-head just suck.

 

[turbo54]

Re: What size Torx for GAP action screws?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 2156SMK</div><div class="ubbcode-body">If it's a badger bottom metal, those screws use a TORX PLUS.
A TORX will work, but is not correct...

</div></div>

Thanks 2156!! I am an ME, and love fasteners, but this was news to me. Time to buy some more tools!

 

[oldfatguy]

Re: What size Torx for GAP action screws?

About to order a Borka #9 set but it does not show the Torx-Plus bits. Any idea where to buy them?

OFG

 

[johnsopa]

Re: What size Torx for GAP action screws?

So, does the GAP/Badger DBM use Torx Plus IP30 screws (instead of the Torx T30 size)?

If so, would the Torx T30 fit, albeit not to the maximum torque?

 

[Cigarcop]

Re: What size Torx for GAP action screws?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: johnsopa</div><div class="ubbcode-body">So, does the GAP/Badger DBM use Torx Plus IP30 screws (instead of the Torx T30 size)?

If so, would the Torx T30 fit, albeit not to the maximum torque? </div></div>

Your T30 will work just fine

 

[SSG3K]

Re: What size Torx for GAP action screws?

Badger ang ga use 30p specific on bottom metal. Snap on is your friend

Rich