where to get dummy rounds?

[tarheel7734]

I have a bunch I use for training and identification. I am wanting to get a 338 norma, 300 prc, and .375 cheytac inert rounds if anyone knows where to get them or if anyone can make them for me.

 

[Maelstrom]

Make them yourself. Load a bullet into a new sized case. Fill the primer pocket with a dab of silicone and you are good to go.

 

[Praeger]

Consider drilling the case. I used these in classes. Never underestimate the possibility of introducing a live round.

 

[Maelstrom]

Consider drilling the case. I used these in classes. Never underestimate the possibility of introducing a live round.
View attachment 7465964

Good point. I always took a sharpie marker and colored the case and bullet. Each caliber got a different color. Easy and cheap to reapply as needed.

 

[tarheel7734]

Make them yourself. Load a bullet into a new sized case. Fill the primer pocket with a dab of silicone and you are good to go.

I dont currently have the ability to load or reload ammo otherwise I would.

 

[dms416]

Consider drilling the case. I used these in classes. Never underestimate the possibility of introducing a live round.
View attachment 7465964

And/or sharpie the bullet a different color like McCourt does on his rainbow box-o-crayon work-up loads.

 

[b2lee]

I dont currently have the ability to load or reload ammo otherwise I would.

I have plenty of 300PRC brass that has primer pockets too large. I can make you a dummy round if you PM me an address to send to. Just let me know what OAL you want? If for mag feeding...tell me the internal dimension of the magazine and I'll back off some.

 

[tarheel7734]

I have plenty of 300PRC brass that has primer pockets too large. I can make you a dummy round if you PM me an address to send to. Just let me know what OAL you want? If for mag feeding...tell me the internal dimension of the magazine and I'll back off some.

Pm sent.