Rifle Scopes Which anticant level does everyone like?
- Thread starter tlsmith22
- Start date
Re: Which anticant level does everyone like?
I have a scope mounted ACD from brownells. It's made well, works well and is solid BUT to see it you have to take your head off the stock just before firing to make sure things are in check.... Which is a bit untidy.
The rail mounted option would be ok I'm guessing but they tend to stick right out the side ready to get caught on kit.
There was a guy working on building a level into the scope rings themselves not long ago, it's a concept idea at the moment from memory but it could be a pretty good idea.
At least with the scope ring version, if you have a swivel bipod locked down it will tend to stay pretty close once you've got it level.
It's a bit of a 1%er but that's the kind of thing you need to focus on the farther out your target is. If memory serves me well, 1 degree of cant is roughly 1 MOA.
I have a scope mounted ACD from brownells. It's made well, works well and is solid BUT to see it you have to take your head off the stock just before firing to make sure things are in check.... Which is a bit untidy.
The rail mounted option would be ok I'm guessing but they tend to stick right out the side ready to get caught on kit.
There was a guy working on building a level into the scope rings themselves not long ago, it's a concept idea at the moment from memory but it could be a pretty good idea.
At least with the scope ring version, if you have a swivel bipod locked down it will tend to stay pretty close once you've got it level.
It's a bit of a 1%er but that's the kind of thing you need to focus on the farther out your target is. If memory serves me well, 1 degree of cant is roughly 1 MOA.
Re: Which anticant level does everyone like?
I run a bsquare in front on the rear ring on the rail All I have to do is open my left eye to see it. It seems to work quite well and was cheap too.
I run a bsquare in front on the rear ring on the rail All I have to do is open my left eye to see it. It seems to work quite well and was cheap too.
Re: Which anticant level does everyone like?
Us optics!!
http://www.midwayusa.com/viewproduct/?productnumber=629842
plus its the only thing i can afford from them
Us optics!!
http://www.midwayusa.com/viewproduct/?productnumber=629842
plus its the only thing i can afford from them
Re: Which anticant level does everyone like?
I use this one from Defensive Edge:
Anti-cant Mount
Here it is on my rig:
I use this one from Defensive Edge:
Anti-cant Mount
Here it is on my rig:
Re: Which anticant level does everyone like?
Rail mounted fixed USO's on my centerfires and a B-Square rail mount on my rimfires.
That's a nice setup Steelhead....
Rail mounted fixed USO's on my centerfires and a B-Square rail mount on my rimfires.
That's a nice setup Steelhead....
Re: Which anticant level does everyone like?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Luvman</div><div class="ubbcode-body">I run a bsquare in front on the rear ring on the rail All I have to do is open my left eye to see it. It seems to work quite well and was cheap too. </div></div>
ditto, $12
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Steelhead</div><div class="ubbcode-body">I use this one from Defensive Edge:
Anti-cant Mount
Here it is on my rig:
</div></div>
seems like the cap blocks the view, and your half a bubble off
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Luvman</div><div class="ubbcode-body">I run a bsquare in front on the rear ring on the rail All I have to do is open my left eye to see it. It seems to work quite well and was cheap too. </div></div>
ditto, $12
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Steelhead</div><div class="ubbcode-body">I use this one from Defensive Edge:
Anti-cant Mount
Here it is on my rig:
seems like the cap blocks the view, and your half a bubble off
Re: Which anticant level does everyone like?
I use a rail mount fixed USO. Works well for me. When in shooting position with good cheek weld you can glance over at the anticant level with non dominant eye.
I use a rail mount fixed USO. Works well for me. When in shooting position with good cheek weld you can glance over at the anticant level with non dominant eye.
Re: Which anticant level does everyone like?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AXEMAN</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Luvman</div><div class="ubbcode-body">I run a bsquare in front on the rear ring on the rail All I have to do is open my left eye to see it. It seems to work quite well and was cheap too. </div></div>
ditto, $12
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Steelhead</div><div class="ubbcode-body">I use this one from Defensive Edge:
Anti-cant Mount
Here it is on my rig:
</div></div>
seems like the cap blocks the view, and your half a bubble off </div></div>
Doesn't block my view at all. I can see the bubble level clearly with my left eye, while my right eye is still on the level with the scope. I don't have to adjust my cheek weld at all. Works great!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AXEMAN</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Luvman</div><div class="ubbcode-body">I run a bsquare in front on the rear ring on the rail All I have to do is open my left eye to see it. It seems to work quite well and was cheap too. </div></div>
ditto, $12
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Steelhead</div><div class="ubbcode-body">I use this one from Defensive Edge:
Anti-cant Mount
Here it is on my rig:
seems like the cap blocks the view, and your half a bubble off </div></div>
Doesn't block my view at all. I can see the bubble level clearly with my left eye, while my right eye is still on the level with the scope. I don't have to adjust my cheek weld at all. Works great!
Re: Which anticant level does everyone like?
I run a rail mounted USO fold to side. Works great!
I run a rail mounted USO fold to side. Works great!
Re: Which anticant level does everyone like?
Tubb is the way to go, I have tried all the rest but the Tubb is the best IMHO, it require you to have the muzzle end turned down to install it.
http://www.superiorshootingsystems.com/T2K_ADD_ON_ITEMS-T2K_Anti_cant_indicator.html
Tubb is the way to go, I have tried all the rest but the Tubb is the best IMHO, it require you to have the muzzle end turned down to install it.
http://www.superiorshootingsystems.com/T2K_ADD_ON_ITEMS-T2K_Anti_cant_indicator.html
Re: Which anticant level does everyone like?
Horus Vision ASLI
Its an Anti-Cant/Cosign Indicator in one unit, and is pretty versitile in mounting. You can convert it to a rail mountable peice with B.O.'s Gen II cosign mount.
Horus Vision ASLI
Its an Anti-Cant/Cosign Indicator in one unit, and is pretty versitile in mounting. You can convert it to a rail mountable peice with B.O.'s Gen II cosign mount.
Re: Which anticant level does everyone like?
Deros Level Grouse. 2X2 for long range / target shooting. 3X3 for everything else.
Deros Level Grouse. 2X2 for long range / target shooting. 3X3 for everything else.
Re: Which anticant level does everyone like?
Sinclair offset. They can be seen without breaking check weld, no moving parts, compact, they won't hang on everything and they won't break your pocket book.
Sinclair offset. They can be seen without breaking check weld, no moving parts, compact, they won't hang on everything and they won't break your pocket book.
Re: Which anticant level does everyone like?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dmg264</div><div class="ubbcode-body">Sinclair offset. They can be seen without breaking check weld, no moving parts, compact, they won't hang on everything and they won't break your pocket book. </div></div>
And what if you have a 34/35mm scope, what then?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dmg264</div><div class="ubbcode-body">Sinclair offset. They can be seen without breaking check weld, no moving parts, compact, they won't hang on everything and they won't break your pocket book. </div></div>
And what if you have a 34/35mm scope, what then?
Similar threads
